MARKING SYSTEM REPAIRS

At Millennium Signatures Marking Systems we have a 3,000 square foot facility in Burlington, Ontario where we can perform even the most complex repairs to any of the products we sell. We have well-trained Technicians and all the Tools, Instruments and huge inventory of Replacement Parts on-hand in case they’re needed to help you get your Computerized Dot Peen Marking System, Galvo Driven Laser Marking Equipment or Electro-Chemical Etching Machines and so much more back up and operational quickly.
Despite selling some of the most reliable, hardworking equipment the industry has to offer, we often service requests to have old equipment overhauled as a means to support newer equipment as a back-up or pretty much any scenario leaving your company in need of Marking Equipment repairs.
We also service TYKMA Electrox Laser Systems and all Marksman Computerized Dot Peen Marking Systems.
For more information, contact one of our Part Marking Specialists at Millennium Signatures Marking Systems today by calling Toll Free
1-(833)-219-1212 or use our local at (905) 639-0909
You can also e-mail us at
info@millenniumsignatures.com

#MarkingSystems #Marksman #EngravingEquipment #MarkingProducts #LaserMarking
#MarkingMethods #MarkingEquipment #JeffGuenther
#DotPeenMarking #EtchingSystems #PermanentMarking #PartMarkingSpecialists

TECHNICAL MARKING

Is part marking technical? It can be.

At Millennium Signatures Marking Systems Inc., our whole world revolves around effective Part Marking Systems, Services and Solutions daily. Some Marking requirements are quite simple, based mostly around appearance and not being easily removed. However, for 30 years we have specialized in supporting The Aerospace, Nuclear and Medical-Surgical Industries among many other industries with meeting their more complex and technical marking requirements.
This could mean permanently marking a surface coating without breaching its protective properties. It could mean providing a clean, deep and professional-looking Low-Stress Chemical Etch to depths that would withstand anything from environmental exposure to naturally occurring abrasion for decades on a vital aircraft component.
It means that we are extremely knowledgeable when it comes to providing “Lab Tested & Certified Products” for Nuclear Part Processing ensuring that specific products are to spec on Halides and Chlorides and conform to all the guild lines you’ve been asked to follow.
No matter what your Part Marking requirements might be, contact the Part Marking Specialists at Millennium Signatures. Allow our team to get you your best possible mark, time and time again…
Contact us toll free (833) 219-1212
Local (905) 639-0909
E: info@millenniumsignatures.com
W: www.millenniumsignatures.com

#TechnicalMarking #Etching #Engraving #PartMarking #ContractMarking #PartMarkingSpecialists #NameplateManufacturing #LaserMarking #LaserEngraving #DotPeenMarking #Marksman #MillenniumSignatures #MarkingProducts #LowStressMarking #MarkingInks
#MarkingServices #MarkingSystems

SCAN YOUR WORK ORDER

MARK YOUR PART. THAT SIMPLE!

We have now made it easier using our Marksman Series Dot Peen Marking Systems to scan a Barcode on a Work Order or Traveller and print the Human Readable data within that code directly onto your part using our App for your Smart Phone or Mobile Device. It’s a process we’ve been able to offer in the past, but never with such speed, ease and simplicity.

Contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. Toll-free at (833) 219-1212 or by using our local at (905) 639-0909.
Inquiries can also be e-mailed to
info@millenniumsignatures.com

#MarksmanMarkingSystems #MarksmanApp #MarkingSystems #MarkingTechnology #MillenniumSignatures #PartMarking #EngravingSystems
 #MarkingMethods #PermanentMarking #DotPeenMarking #PinMarking 
#JeffGuenther #PartMarkingSpecialists

METAL NAMEPLATE IDENTIFICATION

Millennium Signatures Marking Systems can help you with every aspect of this process. We manufacture Custom Metal Nameplates from a variety of materials using a host of different processes. We can efficiently handle processing low volume applications such as a single plate or thousands. We have the following processes to work with, Photo-Resist Deep Etch & Fill, Metal Photo, Anodized Aluminum Plates, Mechanically Engraved, Laser Etched, Laser Sintered and basic Screen Printed Plates.

POPULATING VARIABLE DATA
In addition to making plates from scratch, we have our very impressive Marksman Series Computerized Dot Peen Marking Technology allowing us to mark the variable data on your plates to drawing for you or supply you with the right Machine Model and Tooling to do the work yourself in-house.

Millennium Signatures is your complete source for Part Marking and Traceability processes. Contact our Part Marking Specialists toll free at
(833) 219-1212 or using our local at (905) 639-0909. You can always send in your inquiry complete with drawings and photos as required to info@millenniumsignatures.com

#Nameplates #MetalNameplates #EtchedNaneplates #PopulatingNameplates #EngravedNameplates #PrintedNameplates #NameplateMarking #NameplateStamping #Marksman
#DotPeenMarking #MillenniumSignatures #PartMarkingSpecialists #MarkingSystems.

 

TWO (2) WEBSITES

That’s right! Millennium Signatures Marking Systems actually has two (2) Websites to help you find and learn about the Marking Processes that meet your product identification requirements. One is our main site which is an overview of all of our Marking Products and Services, this can be found at
millenniumsignatures.com. The other is designed specifically to provide content for our Marksman Series Dot Peen Marking Systems and Accessories etc.
This can be found at marksmanmarkingsystems.com

Our Marksman Series Dot Peen Markers are very popular and we hold a huge inventory of new systems, replacement parts and accessories as a result! We will have what you need readily available when you need it!
Check out our websites and contact the Part Marking Specialists at Millennium Signatures Marking Systems by calling (833) 219-1212 toll free from anywhere within North America or by using our local number (905) 639-0909 as required.
We can also be reached by e-mail at info@millenniumsignatures.com

#Marksman #ComputerizedStamping
#EngravingSystems
#MarkingSystems
#MillenniumSignatures
#PermanentMarking
#LowStressMarking
#EngravingServices
#MarkingMethods
#DotPeenMarking
#ContractMarkingServices

 

MARKING SYSTEMS & SERVICES

Think of Millennium Signatures Marking Systems first when the need to identify parts and product arises. Millennium Signatures is not only a supplier of the best Marking Systems the Marking Industry has to offer, but also provides highly efficient Custom Part Marking Services too. When it comes to any of the following products and services, call Millennium Signatures toll free at (833) 219-1212 or (905) 639-0909 and talk to our Part Marking Specialists about your application.
> Roll Marking
> Chemical Etching Equipment
> Laser Marking Systems
> Custom Engraved Stamps & Dies
> Computerized Dot Peen Marking
> Custom Etched Nameplates
> Engraving Services
> Laser Sintering
> Hand Stamps
> Marking Inks & Solvents
> Dry Ink Pads
> Rubber Stamps
> Mylar Stencils
> Benchtop Laser Marking
> Circumferential Marking
> Arc Marking
> Low Stress Marking
> Indent Stamping
> Deep Laser Engraving
> Etching Electrolytes & Neutralizer
> Steel Insert Type
> Segmented Steel Type
> Roll Dies
> Custom Part Marking Services

WESTEC 2019

Millennium Signatures Marking Systems is exhibiting at this weeks Westec 2019 Trade Exhibition in beautiful Long Beach California.
We are presenting our Marksman Series Computerized Dot Peen Marking & Scribing Equipment.
We are located at booth 850 of the main hall.
Stop by to see us between 10:00am and 5:00pm today and tomorrow and 10:00am and 4:00pm on Thursday.

For more information, contact us at 1-833-219-1212 and speak with one of our Part Marking Specialists.

#MillenniumSignatures
#Marksman #PartMarking #PermanentMarking #MarkingServices #MarkingProducts #MarkingSystems #DotPeenMarking #Etching #Scribing #Stamping #MarkingMethods

MARKSMAN SERIES MARKING SYSTEMS – EASE OF USE

One of the beautiful things about our Marksman Series Products is its straight forward ease of use. 
We ship these systems throughout North & South America on a daily basis and for those who are not close to one of our distribution partners, someone with no familiarity can be operational and marking parts in 15 minutes with instruction over the phone of by watching short video clips sent by e-mail. Within your first hour, you will know everything you need to know to operate these Marking Machines on a daily basis. 
The interface is a simple 7 step process which you tab from step to step in a clockwise configuration on the stand-alone controllers or from left to right in the case of the optional software for PCs.

– F3 EDIT SCREEN –

1. MARK TYPE
Select the type of Mark you’re looking make ie. Standard LINEAR, RADIAL (Arc), GRAPHIC (PLT), MATRIX (2D/QR Code)

2. X-AXIS 
Select the starting point for the bottom left corner of your first character on your X-AXIS

3. Y-AXIS
Select the starting point for the bottom left corner of your first character on your Y-AXIS

4. ANGLE
Select the angle at which you want your words/image to print. Straight horizontal along the X-Axis is zero 0 degrees

5. CHARACTER HEIGHT
Select the height of the characters you wish to print in this BLOCK in millimetres.

6. PITCH
Select the pitch also known as the compression of the character. If the PITCH is set to the same value as the character height than the character will be a normally proportioned character with 3/4 its height being its width. So if a typical 3mm character is desired, the pitch or (PX ) value should also be set to 3mm. If you are bound by spec to six (6) characters at a stipulated height 3mm but you only have physical room for five (5) and you need to compress the width of characters you could set your height value (CH) at 3mm and your pitch (PX) value at 2.6mm. This will compress the width of the characters some allowing you to fit more characters into a given area.

7. VARIABLE DATA
The last step is actually where you type in the data you wish to print in this BLOCK. In the case of a Barcode, you would type in the content of what the code would ultimately contain and the system will generate the code to contain that data.

Following these 7 easy progressional steps, you can go to the F2 Screen and activate the marking process.

There is the process of saving a layout and recalling or “loading” a previously saved layout. There are some other features such as the F7 Feature allowing you to view your marking layout in relation to the physical limitations of your marking area and a few other features that can be helpful in certain situations, but overall it’s just about that easy.

We have helped hundreds of companies go from opening the box to fully operations from remote locations in as little as 15 minutes and as much as an hour depending on the configuration of the system they are using and their computer skills and familiarity with basic CNC type equipment.

Getting the job done right does not have to be complicated!

For more information on the features and capabilities of our Marksman Series Computerized Dot Peen and Scribing Systems, contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
T: (905) 639-0909
E: info@millenniumsihnatures.com
W: marksmanmarkingsystems.com
or millenniumsignatures.com

#MarksmanMarkingSystems #MillenniumSignatures #DotPeenMarking#ProductTraceability #PermanentMarking #Engraving #MarkingTechnology#MarkingProducts #MarkingSystems #PartMarking
#MarkingMethods #BarcodingMetals

TRACKING YOUR RAW MATERIALS

Tracking your raw materials as they come through the door and all the way through the manufacturing process has never been easier!

The Marksman Series MKP-054 Hand-Held, Bluetooth, Battery Operated Portable Marker by Millennium Signatures is available as what we call “Portable/Benchtop Combination Systems”. It allows all the fantastic features of the Portable System but also slides effortlessly into a positive locating fixture on our T-300 Precision Z-Axis Tool Post which allows hands-free operation of smaller components and Nameplates in a traditional Bench Top Format.

BOTH our MKP-054 and the larger format, pneumatic model known as the MK-100N/1340G can be offered in a Combination System Format.

OPTION A
The MKP-054 is a Battery Powered Blue Tooth System that offers a Marking Field of 70 mm x 35 mm or
2.75” x 1.37”

OPTION B
The MK-054 Pneumatic offers is a Pneumatic Solenoid Driven Model that includes an umbilical that delivers, power, data and compressed air. This offers a Marking Field of 50 mm x 40 mm 
or 1.96” x 1.57”.

OPTION C
The Large Format MK-100N/1340G System is also equipped with an umbilical that delivers Power, Data and Compressed Air to the Marking Head which offers a Larger Marking Field of 120 mm x 38 mm or 4.72” x 1.49”

OPTION D
The MKP-054 Battery Operated Portable is now available with a keyboard integrated into the Marking Head. It still offers Bluetooth and communicates with our IOS and Android Based Apps for your Smart Phones and Tablets, but also allows easy editing variable data right there on the device, quick and easy!

As mentioned, all of these Portable Models are available in the Combination System Format.

For more information on these and other Marking Technologies, contact the Technical Sales Team at Millennium Signatures Marking Systems Inc. We are the Part Marking Specialists for today’s industry. 
T: (905) 639-0909
E: info@millenniumsignatures.com 
W: marksmanmarkingsystems.com

#PortableMarking
#Engraving #PermanentMarking
#ComputerizedStamping #Traceability #MaterialTracking#ProductIdentification #MarkingSystems #MarkingProducts #IndentMarking #IndentStamping #LowStressMarking
#Marksman #MillenniumSignatures #JeffGuenther

MARKSMAN SERIES LARGE FIELD ROTARY MARKER (EASTEC 2019)

Marksman’s Dynamic Large Field Rotary Marker will be on display at this year’s Eastec Exhibition in West Springfield Massachusetts next week (May 14,15 and 16 of 2019)

This unique system offers a Large 250mm x 250mm Marking Area making it super versatile for large components, multiple component marking and populating variable data on Metal Nameplates. This system is equipped with our Extended Height T-500-H Heavy Duty Manual Adjustable Z-Axis Tool Post which securely supports the large Marking Head Format while offering additional height allowing taller components to be marked.

As with previous generations of our Rotary Models, this equipment is equipped with a very heavy duty Precision Rotary Drive and 3-Jaw Chuck or Collet Assembly. 

Standard models can accommodate a 6.0” (15.24cm) diameters component. We can also modify this machine to accommodate larger diameters as needed. This system is a Ball Screw Driven Design which boasts the highest level of accuracy and repeatability available. It offers marking speeds of up to 5 characters per second (2.5mm) and is highly efficient at marking text of various fonts, mirror image characters, vector images (logos), 2D Barcodes, QR Codes, 2D Matrix and UID Code Technology. These systems are very robust with no cast components. All Precision machines components go into this very unique Marking System. 

The most valuable feature of this machine in our opinion is the Positive Locating Rotary Axis Slide Feature. This prevents you from having to manually set-up and align the rotary System to your Marking Head each time. The rotary axis stays aligned and can slide in to use and lock in place in one (1) second. 

If you need to use the system to mark a Nameplate or a flat component, unlock your rotary Axis, slide it out from under the marking head, pull up your new program and you’re Marking Flat stock. Do the same two steps again and you’re back marking Round stock. It’s that easy!

Contact one of the Part Marking Specialists at Millennium Signatures Marking Systems Inc., to learn more out the MK-200BN/250 complete with CDC-20 Rotary and all of its capabilities. 

T: (905) 639-0909

E: info@millenniumsignatures.com

W: marksmanmarkingsystems.com

or millenniumsignatures.com

#RotaryMarking

#CircumferentialMarking #CylinderMarking #DotPeenMarking#MarksmanRotary #PinMarking #ComputerizedMarking #Eastec2019#MillenniumSignatures #MarkingProducts #MarkingSystems#ProductTraceability #PermanentMarking