TECHNICAL MARKING

Is part marking technical? It can be.

At Millennium Signatures Marking Systems Inc., our whole world revolves around effective Part Marking Systems, Services and Solutions daily. Some Marking requirements are quite simple, based mostly around appearance and not being easily removed. However, for 30 years we have specialized in supporting The Aerospace, Nuclear and Medical-Surgical Industries among many other industries with meeting their more complex and technical marking requirements.
This could mean permanently marking a surface coating without breaching its protective properties. It could mean providing a clean, deep and professional-looking Low-Stress Chemical Etch to depths that would withstand anything from environmental exposure to naturally occurring abrasion for decades on a vital aircraft component.
It means that we are extremely knowledgeable when it comes to providing “Lab Tested & Certified Products” for Nuclear Part Processing ensuring that specific products are to spec on Halides and Chlorides and conform to all the guild lines you’ve been asked to follow.
No matter what your Part Marking requirements might be, contact the Part Marking Specialists at Millennium Signatures. Allow our team to get you your best possible mark, time and time again…
Contact us toll free (833) 219-1212
Local (905) 639-0909
E: info@millenniumsignatures.com
W: www.millenniumsignatures.com

#TechnicalMarking #Etching #Engraving #PartMarking #ContractMarking #PartMarkingSpecialists #NameplateManufacturing #LaserMarking #LaserEngraving #DotPeenMarking #Marksman #MillenniumSignatures #MarkingProducts #LowStressMarking #MarkingInks
#MarkingServices #MarkingSystems

WESTEC 2019

Millennium Signatures Marking Systems is exhibiting at this weeks Westec 2019 Trade Exhibition in beautiful Long Beach California.
We are presenting our Marksman Series Computerized Dot Peen Marking & Scribing Equipment.
We are located at booth 850 of the main hall.
Stop by to see us between 10:00am and 5:00pm today and tomorrow and 10:00am and 4:00pm on Thursday.

For more information, contact us at 1-833-219-1212 and speak with one of our Part Marking Specialists.

#MillenniumSignatures
#Marksman #PartMarking #PermanentMarking #MarkingServices #MarkingProducts #MarkingSystems #DotPeenMarking #Etching #Scribing #Stamping #MarkingMethods

FREE PICK-UP & DELIVERY

Millennium Signatures Burlington, Ontario Facility is now offering FREE PICK-UP & DELIVERY on Custom Part Marking Services of $500 or more to our clients in the following areas:

  • Stoney Creek
  • Hamilton
  • Brantford
  • Ancaster
  • Dundas
  • Flamborough
  • Waterdown
  • Burlington
  • Oakville
  • Milton

Have the Part Marking Specialists at Millennium Signatures do your Chemical Etching, Engraving, Laser MarkingStamping, Laser Sintering and Dot Peen Marking for you. We have over 50 years of experience, we are equipped with the best technologies in the industry and we offer a very high-quality service with fast turnarounds. Make sure that you’re making your best impression when it comes to the product you put before your customers. 
Millennium Signatures can make it easy! 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and 
marksmanmarkingsystems.com

#ContractMarkingServices #PartMarking #CustomPartMarking
#Etching #Engraving #SteelStamping #LaserMarking #MilSigMarking#ContractMarking #PartMarkingSpecialists #ProductIdentificationServices
#EngravingSouthernOntario #LaserPartMarking #VibroPeenMarking #MarkingServices#MarkingProducts #MarkingMethods
#MarkingDevices
#MarkingSystems

CONTRACT MARKING SERVICES

Our team goes to great effort to review our customer’s instructions in great detail and always get a First Article Photo approved before processing to give our customers EXACTLY what they want on their parts. 
Contact the Part Marking Specialists at Millennium Signatures Marking Systems if you are looking to purchase Marking Technology for your shop or need to have parts processed for you. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

COMBINATION MARKING

When using a Hand Held Portable Marker to stamp identification onto your parts, it’s easy when it comes to larger, heavier parts or assemblies and nothing could be better given the computerized solution that offers cord-free portability and comfort. However, it could be challenging or impossible to mark small components should the need arise. 
For this reason, Millennium Signatures introduces our Combination Marker Set-up. Combining our T-300 Base & Column used for some of our Bench Top configurations with our very popular MKP-054 Blue Tooth Enabled Battery Powered Hand-Held Marking Head now allows you to effectively holster that Portable Marking Capability quickly into a Bench Top Marker configuration making it very easy to mark small tools, couplings, valves or almost any small metal or plastic components that would have been hard to do with a portable previously. It also makes it useful for marking small Nameplates with great precision. 
Contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. To learn more about how to get more out of your Marksman Hand-Held Portable Marking System. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: marksmanmarkingsystems.com

DID YOU KNOW…

Not only can Millennium Signatures Marking Systems CUSTOM PART MARKING Division (Contract Marking Services) look after all your Part Marking needs, but we can also accommodate your Type II and Type III Anodizing, Heat Treat and Stress Relieving requirements also! That’s right, you can send your parts to us for precision marking services and in many cases, we can accommodate some of the other processes you outsource. Hopefully, we can make things easier for you to buy reducing the coordination of time and multiple destinations. One invoice, very easy! We have 50 Years of experience working to spec!
Contact the Part Marking Specialists at Millennium Signatures Marking Systems and ask about our Contract Marking Services and all that we can do for you! 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com

CUSTOM PART MARKING or “Contract Marking” as its sometimes called…

      

A bit about the services we offer. As Part Marking Specialists, we spend all day, every day evaluating various types of parts of all shapes, sizes and materials being manufactured to various industry and military specifications. Our core business is to assist our customer with determining which of our many Marking Systems is ideally suited for their specific needs and getting them set-up with it. 
However, with such an accumulated wealth of knowledge and experience dating back almost 50 years, we have made Custom Part Marking or “Contract Marking” a service we’ve offered for more than 18 years now and it’s become a huge part of our business! 
We’ve equipped a division with all the high-end pieces of equipment and technology we manufacture and sell along with an in-house artwork department. We can handle pretty much any part marking task you can throw at us. We have several Fibre Laser Marking Technologies, we have CO2 Lasers, we have a whole range of Computerized Dot Peen Marking Systems with various capabilities from DEEP MARKING to Circumferential or “Cylindrical” Marking capabilities. We have Electro-Chemical Etching and make Custom Stencils right on-demand in-house. We do engraving and stamping. We do Computer Controlled Low-Stress Scratch Marking or Scribing. We have a LOT of capability and most importantly a wealth of Experience & Talent in-house to process your parts exactly as needed and with very fast turn-around. Next day in most cases!
One of our most popular offerings is a program that combines Custom Part Marking Services with a desire to make an equipment purchase. We have our client give at least a batch of your production parts for processing initially. Yes, you pay us to mark them but we will design and create effective positive locating jigs and fixtures for you. We will do the application testing and get you exactly the great results you have in mind and we will set-up Marking Layouts optimized for higher throughput applications, the graphics and the programs for you. We will process parts for you once or as often as you’d like until you are ready to have the same equipment we are using in our Custom Marking Center places on your factory floor. We will have gotten the results you want and you will have already gotten feedback from your colleagues and clients. We will have worked out the fine details of any new process set-up and when you decide you want a brand new version of the same on your shop floor, we will give you the programs, fixtures, settings, EVERYTHING needed to start production marking immediately!

We are told often that the experience is a smart way to buy things. It’s a smooth process that gives the buyer total confidence in their purchase and certainly a very effective way to introduce and start using a new process.

We are able to mark almost anything. We are not very limited by part size, weight or material. We have a lot to offer. Contact our Part Marking Specialists at Millennium Signatures Marking Systems and ask about what we can do for you. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com or 
marksmanmarkingsysrems.com

#ContractMarking #CustomPartMarking #MarkingSpecifications#LowStressMarking #ChemicalEtching #Engraving #PartMarking#Marksman #MillenniumSignatures #LaserMarking #MilSigMarking#MarkingProducts #MarkingDevices #MarkingMethods #MarkingProcesses#MarkingServices #PermanentMarking #ProductionMarking

CONTRACT PART MARKING

At Millennium Signatures Marking Systems we work daily with manufacturers from all industries to access their part marking requirements and supply them with the right equipment and keep them operational. However, we also provide Custom Part Marking Services or “Contract Marking” as its often referred to by some. Sometimes, especially when volumes are not very high, it’s easier for a manufacturer to send their parts to us and allow us with our nearly half a century of experience and a wide range of equipment and tooling to mark their parts for them. We do the work quickly and efficiently and always provide a First Article part or photo as per the clients request for inspection before the lot is processed no matter how large or small. 
It also serves a second very valuable purpose. If you are considering buying technology, we can use the technology you are most interested in to mark your parts. Yes, you pay for the service, but in the end, after one batch or twenty (20) batches you will have complete confidence in the systems we use because what we use, is what we sell. You will know the parts meet your customer’s specifications and when you invest in the equipment you will be entirely certain that it will do the job you expect. Also, any jigs, fixtures, artwork, layouts and programs that we develop when processing your parts are yours when you purchase. This way your in full production from Day 1 when your System is delivered. It serves a lot of companies very well when they are unsure about a process, or time is of the essence. You will hit the ground running with this unique way of buying your new Marking Technology.
Contact our Part Marking Specialists for more information on what we can do specifically for you. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com
marksmanmarkingsystems.com

 

CUSTOM PART MARKING SERVICES

HISTORY

Millennium Signatures Marking Systems Inc. has an extensive history of selling and supporting Part Marking Technologies or Traceability Systems to the Manufacturing sector going back as far as 1972. Despite that its principal business is to sell, integrate and support the various methods of marking, we also have a very successful Custom Part Marking Division which has been servicing hundreds of clients for almost 15 years now. We have taken our extensive knowledge of Part Marking practices and our impressive range of equipment and made our services open to any clients who do not wish to invest in the technology for one reason or another or who wish to essentially get their products out onto the field and trial the marking results before committing to a process. There are many advantages to outsourcing your marking even if just initially. Let us do the hard work for you.

EXPERTISE

Those staffing the Millennium Signatures Custom Part Marking Division have extensive knowledge of how to work the various technologies and work to even the most rigid specifications. We can take on the marking of complex part configurations much more effectively that someone new to the process. Our pricing is very effective, and our turn-around times are said to be “excellent” based on feedback from our existing client base. Some of our clients bring their parts to us because they’re volumes are too low to justify an equipment purchase, others just don’t have the time or expertise. However, our Custom Part Marking Services provides another very valuable option for those considering buying their own equipment.

ADVANTAGES

If you send your parts to Millennium Signatures Marking Systems for processing, we will design proper fixturing that will positively locate and secure your part during the marking process. We will create layouts and programs allowing the chosen technology to execute the marking sequence properly and we will always provide First Article Samples or detailed photos to the client before proceeding with marking a batch of their parts. You can pay us to mark a single batch of your parts or you can bring us batches of parts for marking for years and years. When you’re ready to make a purchase, Millennium Signatures will not only outfit you with the proven hardware selection we use to process your parts, but we will bring our NEW equipment to your facility, install it and train your operators. The beautiful thing is that we will hand over all the fixtures, programs, layouts, stencils, artwork or any other production aids that we used to mark your parts, so you are now instantly in production. You will have absolutely everything you need to make the perfect impression from the time we walk out of your facility. Going about it in this way allows you to get the marking you need to be done (by professionals), it allows you to see and experience the results before committing to any significant cash outlay and there is never any expectation of an equipment purchase. However, if you do you will know you are selecting the right equipment for the job and you will be provided with absolutely EVERYTHING you need to get started.

PROCESSES

Our Custom Part Marking Services Division offers the following technologies which can be used to mark your parts, Electro-Chemical Etching, Engraving, Computerized Dot Peen Stamping, Ink Marking and both Fibre and CO2 Laser Marking. If you are not sure which technology is best for your application, contact our Part Marking Specialists at info@millenniumsignatures.com or by phone at (905) 639-0909 and have us evaluate your application properly and give you our recommendations.

RECOMMENDATIONS

It is strongly recommended that if you are having us process your parts for the first time, that you provide us with extra parts, scrap parts or spares. It is always best to have an actual part that we can set-up and test with before starting to run production on a good batch of parts. If a spare part is not available, it is quite possible we can still get you a perfect marking from the start, but a close second would be to get a sample piece of the very same material and surface condition as the actual parts we would be expected to mark.

If absolutely nothing is available, it is likely with our expertise that we can still get you a highly acceptable marking the first time, but it’s a much more challenging task for us and it may take longer or the first part or first few parts of that batch may be less than ideal before we manage to dial the settings in just right to secure a perfect marking for all the rest. There is no other alternative, however with all that we see on any given day our chances of getting a highly acceptable mark is much better than for most anyone else.

POLICIES

We often see hundreds and sometimes thousands of parts processed in our facilities each day. We have an unbelievable record for accuracy and acceptability among our clients, but things can happen for a multitude of reasons ranging from very confusing instructions from clients to inconsistencies in the product to hardware/software failures and on occasion even human error. We have created a process whereby we evaluate the client’s job, we review the materials sent. We prepare a sample and we either send the sample to the client for an approval (if time permits) or in most cases, we are asked to take good quality close-up images of the marking results and transmit them electronically to our clients for review and approval before proceeding onto multiple parts. If an error takes place that is deemed to be the fault of Millennium Signatures Marking Systems role in the processing of parts, Millennium Signatures limits its liability to the cost of remarking parts only. Millennium Signatures Marking Systems Inc. is to be in no way held responsible for the costs associated with removal of unwanted markings, recoating, reworking or replacement of customer supplied parts. There is simply too many variables and an extreme range of different products and circumstances for Millennium Signatures to take on such responsibility. Given, such circumstances, our team takes our responsibility very seriously and treats all customer supplied components with the highest levels of care and consideration.

PACKAGING & HANDLING

Please consider that we appreciate that expensive parts that are time-consuming to produce need to be protected and need to be transported carefully. Out of respect to our clients, we go through a series of procedures to ensure that our client supplied products are handled in such a manner that accidental dropping or scratching etc. is minimized if not eliminated. Our processes include handling the part as little as possible, working over anti-fatigue matting on floors and workbenches to cushion any unexpected impacts. We take the parts from any protective packaging, mark the part to specification and return immediately to the same packaged state they are received unless instructed in writing to do otherwise. Our fixturing is custom made on-site out of Plastics, Acrylics and Nylons to prevent scratching or scuffing of parts while being processed. We even wear gloves and can use a lint-free microfibre polishing cloths to clean up parts of any fingerprints if they are decorative parts such as chrome fixtures etc.

CUSTOM MARKING REQUESTS & INFORMATION

If you are thinking of having our Part Marking Specialists process some of your parts for you, please call us at (905) 639-0909 or send us an e-mail at info@millenniumsignatures.com. Allow us to answer your questions, quote on your requirements and discuss your special requirements. We see all kinds of unique requirements daily and we are confident we can accommodate yours.

 

CUSTOM PART MARKING SERVICES

Have you ever considered outsourcing your part marking? What if you could get you parts turned around very quickly and marked to specification by Part Marking Specialists using the corresponding process/technology with a fixed cost per part?
It’s completely possible and is part of the everyday activity at Millennium Signatures Marking Systems Inc.
We have hundreds of clients who sent in both simple and very challenging part marking requirements from all over North America who just want their parts done right, using the best technology and love our service.
We can process a couple parts or we can process thousands of parts. There is no job too big or too small. 
We can do Rotary Application work (Circumferential Marking) we can accommodate almost any material. We are very accustomed to working with Aerospace, Nuclear and Military Marking Specifications. Contact our Part Marking Specialists today via our general inquiry line at (905) 639-0909 or by e-mail at info@millenniumsignatures.com

Processed we can provide include:
> Galvo Driven Fibre & CO2 Marking
> Electro-Chemical Etching
> Computerized Dot Peen Marking
> Solid Die Steel Stamping
> Engraving

Visit our websites at:
www.millenniumsignatures.com
www.marksmanmarkingproducts.com

#LaserMarking #PartMarking #Etching #CustomPartMarking#PartMarkingSpecialists #MarkingMethods #MarkingEquipment
#PermanentMarking #Engraving
#SteelStamp #MarkingProducts #ChemEtch #Marksman #TYKMAElectrox#Minilase #Scorpion #FibreLaser #GalvoLaser #DeepEtching#AerospacePartMarking #MilitaryMarking #MillenniumSignatures