At Millennium Signatures Marking Systems Inc., our whole world revolves around effective Part Marking Systems, Services and Solutions daily. Some Marking requirements are quite simple, based mostly around appearance and not being easily removed. However, for 30 years we have specialized in supporting The Aerospace, Nuclear and Medical-Surgical Industries among many other industries with meeting their more complex and technical marking requirements.
This could mean permanently marking a surface coating without breaching its protective properties. It could mean providing a clean, deep and professional-looking Low-Stress Chemical Etch to depths that would withstand anything from environmental exposure to naturally occurring abrasion for decades on a vital aircraft component.
It means that we are extremely knowledgeable when it comes to providing “Lab Tested & Certified Products” for Nuclear Part Processing ensuring that specific products are to spec on Halides and Chlorides and conform to all the guild lines you’ve been asked to follow.
No matter what your Part Marking requirements might be, contact the Part Marking Specialists at Millennium Signatures. Allow our team to get you your best possible mark, time and time again…
Contact us toll free (833) 219-1212
Local (905) 639-0909
That’s right! Millennium Signatures Marking Systems actually has two (2) Websites to help you find and learn about the Marking Processes that meet your product identification requirements. One is our main site which is an overview of all of our Marking Products and Services, this can be found at millenniumsignatures.com. The other is designed specifically to provide content for our Marksman Series Dot Peen Marking Systems and Accessories etc.
This can be found at marksmanmarkingsystems.com
Our Marksman Series Dot Peen Markers are very popular and we hold a huge inventory of new systems, replacement parts and accessories as a result! We will have what you need readily available when you need it!
Check out our websites and contact the Part Marking Specialists at Millennium Signatures Marking Systems by calling (833) 219-1212 toll free from anywhere within North America or by using our local number (905) 639-0909 as required.
We can also be reached by e-mail at firstname.lastname@example.org
We are at the Westec 2019 Trade Exhibition in beautiful Long Beach California with our Marksman Series Dot Peen Marking Systems
One of the newer items being presented at this show is our MKP-054K Battery Operated Hand-Held Portable Marker complete with built-in Keyboard, Bluetooth communications with a PC or any mobile device using our Free Apps designed for use with IOS and Android-based products.
These systems are durable, lightweight, easy to work with.
Contact our Part Marking Specialists at Millennium Signatures Marking Systems Inc.
Toll Free: 1-(833) 219-1212
Local: (905) 639-0909
Tracking your raw materials as they come through the door and all the way through the manufacturing process has never been easier!
The Marksman Series MKP-054 Hand-Held, Bluetooth, Battery Operated Portable Marker by Millennium Signatures is available as what we call “Portable/Benchtop Combination Systems”. It allows all the fantastic features of the Portable System but also slides effortlessly into a positive locating fixture on our T-300 Precision Z-Axis Tool Post which allows hands-free operation of smaller components and Nameplates in a traditional Bench Top Format.
BOTH our MKP-054 and the larger format, pneumatic model known as the MK-100N/1340G can be offered in a Combination System Format.
The MKP-054 is a Battery Powered Blue Tooth System that offers a Marking Field of 70 mm x 35 mm or
2.75” x 1.37”
The MK-054 Pneumatic offers is a Pneumatic Solenoid Driven Model that includes an umbilical that delivers, power, data and compressed air. This offers a Marking Field of 50 mm x 40 mm
or 1.96” x 1.57”.
The Large Format MK-100N/1340G System is also equipped with an umbilical that delivers Power, Data and Compressed Air to the Marking Head which offers a Larger Marking Field of 120 mm x 38 mm or 4.72” x 1.49”
The MKP-054 Battery Operated Portable is now available with a keyboard integrated into the Marking Head. It still offers Bluetooth and communicates with our IOS and Android Based Apps for your Smart Phones and Tablets, but also allows easy editing variable data right there on the device, quick and easy!
As mentioned, all of these Portable Models are available in the Combination System Format.
For more information on these and other Marking Technologies, contact the Technical Sales Team at Millennium Signatures Marking Systems Inc. We are the Part Marking Specialists for today’s industry.
T: (905) 639-0909
Millennium Signatures Marking Systems will be showcasing our Marksman Series, Computerized Dot Peen / Pin Marking Technology at Eastec 2019 this May in Springfield MA. If you manufacture a product and wish to advance your abilities for tracking your raw materials or the finished product, visit with the Part Marking Specialists at Millennium Signatures to get information on all the latest methods, technologies and services available in the world of Part Marking/Traceability. We specialize in a variety of processes and have over 50 Years of experience
Contact us at
T: (905) 639-0909
W: millenniumsignatures.com and marksmanmarkingsystems.com
A bit about the services we offer. As Part Marking Specialists, we spend all day, every day evaluating various types of parts of all shapes, sizes and materials being manufactured to various industry and military specifications. Our core business is to assist our customer with determining which of our many Marking Systems is ideally suited for their specific needs and getting them set-up with it.
However, with such an accumulated wealth of knowledge and experience dating back almost 50 years, we have made Custom Part Marking or “Contract Marking” a service we’ve offered for more than 18 years now and it’s become a huge part of our business!
We’ve equipped a division with all the high-end pieces of equipment and technology we manufacture and sell along with an in-house artwork department. We can handle pretty much any part marking task you can throw at us. We have several Fibre Laser Marking Technologies, we have CO2 Lasers, we have a whole range of Computerized Dot Peen Marking Systems with various capabilities from DEEP MARKING to Circumferential or “Cylindrical” Marking capabilities. We have Electro-Chemical Etching and make Custom Stencils right on-demand in-house. We do engraving and stamping. We do Computer Controlled Low-Stress Scratch Marking or Scribing. We have a LOT of capability and most importantly a wealth of Experience & Talent in-house to process your parts exactly as needed and with very fast turn-around. Next day in most cases!
One of our most popular offerings is a program that combines Custom Part Marking Services with a desire to make an equipment purchase. We have our client give at least a batch of your production parts for processing initially. Yes, you pay us to mark them but we will design and create effective positive locating jigs and fixtures for you. We will do the application testing and get you exactly the great results you have in mind and we will set-up Marking Layouts optimized for higher throughput applications, the graphics and the programs for you. We will process parts for you once or as often as you’d like until you are ready to have the same equipment we are using in our Custom Marking Center places on your factory floor. We will have gotten the results you want and you will have already gotten feedback from your colleagues and clients. We will have worked out the fine details of any new process set-up and when you decide you want a brand new version of the same on your shop floor, we will give you the programs, fixtures, settings, EVERYTHING needed to start production marking immediately!
We are told often that the experience is a smart way to buy things. It’s a smooth process that gives the buyer total confidence in their purchase and certainly a very effective way to introduce and start using a new process.
We are able to mark almost anything. We are not very limited by part size, weight or material. We have a lot to offer. Contact our Part Marking Specialists at Millennium Signatures Marking Systems and ask about what we can do for you.
T: (905) 639-0909
W: millenniumsignatures.com or marksmanmarkingsysrems.com
We have a very exciting NEW Bench Top Marking System to tell you about.
It’s called the MK-250/200BN complete with a Heavy Duty Rotary Axis on our unique CDC-20 Positive Alignment Slide.
This system is not entirely NEW as much as it is a seamless blend of other popular Marksman Series Marking Systems. Here are the Four (4) features that make it unique and more versatile than anything else you will find on the market.
1 > This system uses our latest and most compact Controller which is packed with features such as Ethernet, USB, Read/Write SD Card and RS-232 connectivity. This very compact controller comes with an ergonomic Mount +Tray to support the Mini-Keyboard.
2 > This system also incorporated our MH-250 High-Performance Ball Screw Driven Marking Head, which boasts a generous 250mm x 250mm marking area. This is ideal for large parts, multiple parts and excellent for Large Nameplate Marking applications. You can never go wrong with the speed and precision of a Ball Screw Driven Marking Head and the Extra Large Marking Field comes in handy more often than you realize.
3> This extra large Marking Head has been Integrated with our CDC-20 Positive Alignment Slide which is also equipped with a Rotary Axis. The CDC-20 has been modified to allow for the larger parts (or tray of multiple parts) to be supported under the Marking Head. The Positive Alignment Slide Feature allows you to slide your flat part marking applications out of the way bringing in the Rotary Axis with adjustable Tail Stock all the while maintaining perfect alignment for Circumferential Marking of Cylinders. Having this feature allows you to switch out from conventional static Flat Part marking to Rotary Marking and back again if needed in seconds.
4> The last of the major features of this unique new system configuration is the addition of our extra heavy duty Rotary Axis with large 3-Jaw Chuck. It’s much larger and has more torque and accuracy than other systems you’ll find on the market. Without any customization, the Rotary Axis will mark parts up to 6.0” in diameter and part weight in excess of 35lbs. With modification, if needed, we can easily exceed these bits the system will be considered custom and built to suit. This may result in 3-4 lead time.
I promise you that if you’re looking for a Premium System with the versatility to take whatever part marking requirements come your way, this NEW system configuration will impress.
It was so impressive upon our first system build, that we immediately built up more for inventory, this system is proving to be very popular because there is nothing close to it being offered anywhere else.
Contact the Part Marking Specialists at Millennium Signatures Marking Systems about our Marksman MK-200BN/250 c/w CDC-20 Rotary Axis. You can reach us Monday thru Friday from 8:30am to 4:30 Eastern Standard Time.
T: (905) 639-0909
Contact the Part Marking Specialists at Millennium Signatures Marking Systems about our Signature Series MKP-054 Hand-Held Battery Powered Bluetooth Portable Marking System complete with our T-300 Base & Column. Also includes our MKP-054 Quick Release Mount allowing you to use your Hand-Held as a BenchTop Marker, ideal for smaller components.
This system is also available with our High Visibility RED Mobile Marking Cart. This cart is equipped with two (2) Sturdy Shelves and one key lockable storage locker. The Mobile Cart is also equipped with an Electrical Power Bar and 20’ of extension plus a Mounted Air Filter & Regulator if used with our Pneumatic Series Systems
There are a number of reasons why this is the best-designed system in the industry and it sells a price point that will surprise you.
Contact our Technical Sales Office today for more information.
T: (905) 639-0909
W: marksmanmarkingsystems.com or millenniumsignatures.com
Millennium Signatures is very excited about the performance and success of our MKP-054 Bluetooth Handheld Portable Marking System.
We have a very effective adjustable Magnetic Base attachment now which has proven far more effective than competitive systems. It clamps down securely on your Steel Fabrications and secures very well while the Computerized Marking Head puts very clean, permanent identification into the metal exactly as per your layout program which is created and sent from a nearby Mini-Controller or even our Cell Phone App which sends all the information over instantly using Bluetooth Technology.
We maintain this equipment in stock at our US and Canadian Facilities.
Furthermore, we provide fast efficient response to your inquiries and the systems are fully supported with a great technical staff that we are very proud of. Give us a try!
Reach out to our Part Marking Specialists using the following methods
W: marksmanmarkingsystems.com millenniumsignatures.com
This website is dedicated entirely to our Marksman Line of Computerized Dot Peen Marking Equipment. It presents a great deal of information on all our models including our Bench Top Markers, Hand-Held Portable Markers and our Integrator Series Compact Marking Heads for Assembly Line and Automated Cell applications.
This site is dedicated just to this one product line and will be a great help to those looking to purchase pin Marking technology as well as those looking for supporting documentation, specifications and dimensions etc.
We are constantly expanding to accommodate the demand as Marksman has become very popular throughout the USA, Canada and Mexico. Customers report that the quality, capability and reliability for the money spent is exceptional. For more information on the Marksman Series Marking Systems or any Part Marking Technology, please contact our Part Marking Specialists at Millennium Signatures Marking Systems Inc.
Tel: (905) 639-0909