At Millennium Signatures Marking Systems we have a 3,000 square foot facility in Burlington, Ontario where we can perform even the most complex repairs to any of the products we sell. We have well-trained Technicians and all the Tools, Instruments and huge inventory of Replacement Parts on-hand in case they’re needed to help you get your Computerized Dot Peen Marking System, Galvo Driven Laser Marking Equipment or Electro-Chemical Etching Machines and so much more back up and operational quickly.
Despite selling some of the most reliable, hardworking equipment the industry has to offer, we often service requests to have old equipment overhauled as a means to support newer equipment as a back-up or pretty much any scenario leaving your company in need of Marking Equipment repairs.
We also service TYKMA Electrox Laser Systems and all Marksman Computerized Dot Peen Marking Systems.
For more information, contact one of our Part Marking Specialists at Millennium Signatures Marking Systems today by calling Toll Free
1-(833)-219-1212 or use our local at (905) 639-0909
You can also e-mail us at
#MarkingSystems #Marksman #EngravingEquipment #MarkingProducts #LaserMarking
#MarkingMethods #MarkingEquipment #JeffGuenther
#DotPeenMarking #EtchingSystems #PermanentMarking #PartMarkingSpecialists
Is part marking technical? It can be.
At Millennium Signatures Marking Systems Inc., our whole world revolves around effective Part Marking Systems, Services and Solutions daily. Some Marking requirements are quite simple, based mostly around appearance and not being easily removed. However, for 30 years we have specialized in supporting The Aerospace, Nuclear and Medical-Surgical Industries among many other industries with meeting their more complex and technical marking requirements.
This could mean permanently marking a surface coating without breaching its protective properties. It could mean providing a clean, deep and professional-looking Low-Stress Chemical Etch to depths that would withstand anything from environmental exposure to naturally occurring abrasion for decades on a vital aircraft component.
It means that we are extremely knowledgeable when it comes to providing “Lab Tested & Certified Products” for Nuclear Part Processing ensuring that specific products are to spec on Halides and Chlorides and conform to all the guild lines you’ve been asked to follow.
No matter what your Part Marking requirements might be, contact the Part Marking Specialists at Millennium Signatures. Allow our team to get you your best possible mark, time and time again…
Contact us toll free (833) 219-1212
Local (905) 639-0909
#TechnicalMarking #Etching #Engraving #PartMarking #ContractMarking #PartMarkingSpecialists #NameplateManufacturing #LaserMarking #LaserEngraving #DotPeenMarking #Marksman #MillenniumSignatures #MarkingProducts #LowStressMarking #MarkingInks
Millennium Signatures is 100% focused on how to get the best marking possible on your parts. The world of identification is so powerful today and we can help you use the latest in Marking and Coding technology to meet all your customer requirements and promote and market your products better!
Millennium Signatures Marking Systems Inc. knows how to meet various specifications and routinely works with the Food, Drug and Pharmaceutical Industry, The Aerospace Industry, The Oil & Gas Producing Industries, The Nuclear & Power Generation Industry, The Automotive Industry and The Steel Industry among others. As a complete Product Identification & Traceability Company, we manufacture and/or distribute many technologies from Custom Engraved Steel Stamp & Dies to Electro-Chemical Etching, Computerized Dot Peen Marking, Computerized Engraving and Galvo Driven Laser Marking Systems. We formulate Custom Marking Inks & Solvents for direct, offset and Inkjet Marking applications. We manufacture Metal Nameplates custom to suit the exact needs of the customer, we produce Custom Cut Rubber Stamps & Dies and an extensive range of Custom Cut Stencils from Mylar, Oilboard, Plastics and various Metals. It’s hard to make mention of all the bases we have cover to help look after all of your Part Marking requirements.
Give us a call. Our Part Marking Specialists are here to review your requirements and assist you.
Call us Toll Free at (833) 219-1212
or using our local (905) 639-0909
You’re always welcome to reach us anytime by e-mail at email@example.com
#ContractMarkingServices #PermanentMarking #MarkingProducts #MarkingEquipment #MarkingMethods #MillenniumSignatures #JeffGuenther #MarkingInks #Nameplates
It was 30 years ago, on the morning of August 6th, 1989 that I started working alongside my grandfather in a machine shop. I was not even finished school yet but worked every day even around a class schedule. From that day forward, I prepared blanks and related tooling for Custom Engraved Steel Stamping Dies and other accessories to support various Marking Solutions all intended to make it easier and more efficient for manufacturers to identify their parts professionally and permanently. These technologies have allowed them to build brand recognition and take responsibilities for the quality of their products through barcoding, lot numbering, serialization and other forms of traceability in virtually all industries from Aerospace to Nuclear, Medical-Surgical, Steel Industry, Machine & Tool, Plastics Processing and so much more.
I have continued to focus my energies in this very same direction every day since. Today, 30 Years later my company Millennium Signatures Marking Systems Inc., continues to provide even the most hi-tech manufacturing companies of today with the latest Marking capabilities and provide integration services. We have also created a very unique “Custom Part Marking Services” division that allows some clients with highly specialized requirements or smaller volumes to draw upon those 30 years of experience and our dynamic range of processes by bringing their parts to us for processing. We have built a procedure that allows us to assess the application, prepare any artwork, necessary fixturing, material handling etc., and mark the customers’ parts to their exact specifications following a fast and efficient “First Article Inspection Process”. We can now mark most customers parts to their complete satisfaction using any one of several technologies cost-effectively and efficiently typically returned next day or in some cases 1-2 day turn-around depending on volumes and the particulars.
A unique blend of in-house manufacturing and exclusive distribution of some of the very best marking equipment has allowed Millennium Signatures to fill out and offer a dynamic range of high-quality solutions including Galvo Driven Fibre Laser Marking Technology, Computerized Dot Peen Indent Marking & Scribing from our Marksman Series Products and many of our tried & true processes that date back even long before my time such as Electro-Chemical Etching and Custom Engraved Stamping Dies and Inserts etc., plus many more.
We have come to learn that a large inventory in our business is very important. When manufacturers go off-line with their Part Marking for whatever the reason, they need quality solutions available fast and Millennium Signatures Marking Systems has invested a great deal of time and money into making that possible for our continuously growing list of clients.
For more information on Millennium Signatures Marking Systems Inc., you’re welcome to contact one of our Part Marking Specialists Toll Free at 1-(833)-219-1212 or e-mail the team at firstname.lastname@example.org
T: (905) 639-0909
#JeffGuenther #LaserMarking #Engraving #PartMarkingSpecialists#MillenniumSignatures #FibreLaserTechnology #MarkingProducts#MarkingMethods #PermanentMarking #MarkingSolutions #MarkingExperts#LaserSintering #ChemicalEtching #DotPeenMarking #Marksman
Millennium Signatures Burlington, Ontario Facility is now offering FREE PICK-UP & DELIVERY on Custom Part Marking Services of $500 or more to our clients in the following areas:
- Stoney Creek
Have the Part Marking Specialists at Millennium Signatures do your Chemical Etching, Engraving, Laser MarkingStamping, Laser Sintering and Dot Peen Marking for you. We have over 50 years of experience, we are equipped with the best technologies in the industry and we offer a very high-quality service with fast turnarounds. Make sure that you’re making your best impression when it comes to the product you put before your customers.
Millennium Signatures can make it easy!
T: (905) 639-0909
W: millenniumsignatures.com and
#ContractMarkingServices #PartMarking #CustomPartMarking
#Etching #Engraving #SteelStamping #LaserMarking #MilSigMarking#ContractMarking #PartMarkingSpecialists #ProductIdentificationServices
#EngravingSouthernOntario #LaserPartMarking #VibroPeenMarking #MarkingServices#MarkingProducts #MarkingMethods
Not only can Millennium Signatures Marking Systems CUSTOM PART MARKING Division (Contract Marking Services) look after all your Part Marking needs, but we can also accommodate your Type II and Type III Anodizing, Heat Treat and Stress Relieving requirements also! That’s right, you can send your parts to us for precision marking services and in many cases, we can accommodate some of the other processes you outsource. Hopefully, we can make things easier for you to buy reducing the coordination of time and multiple destinations. One invoice, very easy! We have 50 Years of experience working to spec!
Contact the Part Marking Specialists at Millennium Signatures Marking Systems and ask about our Contract Marking Services and all that we can do for you!
T: (905) 639-0909
Millennium Signatures “Marksman Series” Computerized Dot Peen Marking Systems is a comprehensive collection of equipment models, all offering their own unique features and abilities.
Among their many differences, they can be quite easily divided simply into two (2) groups just by the drive technology they are equipped with.
We have the Precision Reinforced Cog Belt Driven models and the slightly higher-end Ball Screw Driven models. While it’s true the Ball Screw Technology does have some advantages over the Reinforced Cog Belt Driven models, don’t fall into the thinking that the Reinforced Cog Belt Driven Systems are inferior or not worthy for those of you who believe strongly in buying a good product and doing things right the first time!
It is true that Ball Screw is a little more precise and does have better registration, repeatability long term, but the reality is they really only show an advantage in some situations. For example, if you are doing Machine-Readable Codes all the time on a regular production basis and your markings are not only required to be clean, sharp and precise to the naked eye, but also to today’s world of high definition scanning technology, then yes there would be an advantage to going to a Ball Screw Design for the very best possible code generation. Ball Screw is also beneficial when it comes to longer distances as in the X or Y-Axis travel of your Marking Head. Our Model MH-250 Marking Head which features a larger marking area of 250mm (9,84”) x 250mm (9.84”) is an example of where we use the Ball Screw Drive mechanism because it allows for us to maintain a tighter tolerance over a greater span. If we build custom Marking Heads for a customer that cover an even larger span, naturally we would continue to stay with the Ball Screw Drive.
Ball Screw is also a little longer lasting, so should your machine be running around the clock or performing a very high number of cycles every hour ongoing then this might be a reason to invest in the slightly more expensive Ball Screw Driven Technology. Ball Screw Systems also yield some additional benefit when marking really small characters. The extra precision of these units will start to show when marking characters under 2.0mm in height with one of our precision marking tips such as the PH-16 or the LP-06.
However, eight or nine of every ten Computerized Dot Peen Marking Systems sold are based on the Precision Reinforced Cog Belt Driven Technology and it is not to be underestimated. It is remarkable the character generation and repeatability these systems provide, year after year. They are also highly proficient at Barcodes such as 2D Matrix, UID and QR codes, it’s only recommended to upgrade if these markings are very high in volume.
When demonstrating these systems, most clients will not even ask to see the Ball Screw Driven models as they feel it is not at all necessary. The marking is extremely clean and the codes read perfectly. The feedback we get from clients that have owned these systems for years, consistently indicates that they continue to perform like new. There is no noticeable deterioration and they are very happy with the reliable, maintenance-free experience they have had.
We have a lot of great Marking Systems for you to see. Regardless which Drive Design you feel is right for you, Marksman Systems are extremely well designed, easy to use and very well priced.
Contact our Part Marking Specialists for more information.
T: (905) 639-0909
W: millenniumsignatures.com and
#MarkingSystemsCanada #MarkingSystemsUSA #MarkingTechnologies#EngravingSystems #EtchingSystems #LaserMarking #PartMarkingCanada#PartMarkingNorthAmerica #DotPeenMarking #AerospaceMarking#MarkingProducts #MarkingMethods #BallScrewMarkers #BeltDrivenModels#Marksman #MarksmanMarkingSystems
A bit about the services we offer. As Part Marking Specialists, we spend all day, every day evaluating various types of parts of all shapes, sizes and materials being manufactured to various industry and military specifications. Our core business is to assist our customer with determining which of our many Marking Systems is ideally suited for their specific needs and getting them set-up with it.
However, with such an accumulated wealth of knowledge and experience dating back almost 50 years, we have made Custom Part Marking or “Contract Marking” a service we’ve offered for more than 18 years now and it’s become a huge part of our business!
We’ve equipped a division with all the high-end pieces of equipment and technology we manufacture and sell along with an in-house artwork department. We can handle pretty much any part marking task you can throw at us. We have several Fibre Laser Marking Technologies, we have CO2 Lasers, we have a whole range of Computerized Dot Peen Marking Systems with various capabilities from DEEP MARKING to Circumferential or “Cylindrical” Marking capabilities. We have Electro-Chemical Etching and make Custom Stencils right on-demand in-house. We do engraving and stamping. We do Computer Controlled Low-Stress Scratch Marking or Scribing. We have a LOT of capability and most importantly a wealth of Experience & Talent in-house to process your parts exactly as needed and with very fast turn-around. Next day in most cases!
One of our most popular offerings is a program that combines Custom Part Marking Services with a desire to make an equipment purchase. We have our client give at least a batch of your production parts for processing initially. Yes, you pay us to mark them but we will design and create effective positive locating jigs and fixtures for you. We will do the application testing and get you exactly the great results you have in mind and we will set-up Marking Layouts optimized for higher throughput applications, the graphics and the programs for you. We will process parts for you once or as often as you’d like until you are ready to have the same equipment we are using in our Custom Marking Center places on your factory floor. We will have gotten the results you want and you will have already gotten feedback from your colleagues and clients. We will have worked out the fine details of any new process set-up and when you decide you want a brand new version of the same on your shop floor, we will give you the programs, fixtures, settings, EVERYTHING needed to start production marking immediately!
We are told often that the experience is a smart way to buy things. It’s a smooth process that gives the buyer total confidence in their purchase and certainly a very effective way to introduce and start using a new process.
We are able to mark almost anything. We are not very limited by part size, weight or material. We have a lot to offer. Contact our Part Marking Specialists at Millennium Signatures Marking Systems and ask about what we can do for you.
T: (905) 639-0909
W: millenniumsignatures.com or
#ContractMarking #CustomPartMarking #MarkingSpecifications#LowStressMarking #ChemicalEtching #Engraving #PartMarking#Marksman #MillenniumSignatures #LaserMarking #MilSigMarking#MarkingProducts #MarkingDevices #MarkingMethods #MarkingProcesses#MarkingServices #PermanentMarking #ProductionMarking
Millennium Signatures at its roots was Chem-Etch and Stamp going back almost 50 years to 1972. In those early years the company was, a leader in Electro-Chemical Etching and Steel Stamp & Die Processes and still is today. In 1987 the company took on the Distribution, Integration and Servicing of Computerized Dot Peen Marking Technology which was completely NEW at that time. It was in 1990 that a separate division of the company was formed and “Canadian Laser Technologies” was created to focus on designing, building and integrating Galvo based Nd:YAG and CO2 Lasers.
It was in 2003 that the company invested extensively in new facilities and new products and completely rebranded to become Millennium Signatures Marking Systems. A complete full service solution for all your Part Marking and Product Identification needs. We have accumulated such an extensive client base that we expanded our focus even further and in 2006 we did a deep dive into the formulation of Custom Inks and Solvents (Printing Ink) to support Direct, Offset and Inkjet Marking System use.
Today we have multiple facilities and deal with manufacturers from virtually every sector of the manufacturing world right around the globe. The bulk of our business is throughout North and South America but we do supply product throughout Europe and many Baltic Countries also.
Today we still come across long time Etching Customers that did not know we supplied and supported Lasers, likewise some Laser customers were surprised to find we are also one of the leading sources of Computerized Dot Peen Marking Equipment and so on. So we are looking to set the record straight and let everyone know the extensive range of products & services that we provide. We stock everything needed for technical support services on everything we sell and have great technicians throughout North America to support our customers with after sales technical support.
Today at Millennium Signatures Marking Systems Inc., we specialize in all of the following products and maintain product on the shelf for quick availability. These Products and Services include:
Custom Engraved Steel Stamp & Die, Custom Tooling & Fixturing, Computerized Dot Peen Marking Systems in Bench Top, Portable and Compact Integrator Series Marker formats, Custom Formulated Industrial Inks & Solvents including Aerospace Marking Inks & Polyurethane Protective Top Coat Products.
We also are highly specialized in Fibre and CO2 Galvo Driven Laser Marking Systems, Electro-Chemical Etching, Custom Cut Stencils, Laser Sintered Signs, Vibro Etch and Scribe Marking Technologies and we are a Manufacturer of Custom Steel & Aluminum Nameplates and high quality Self-Adhesive Labels and Decals. Then of course is our very popular Custom Part Marking Services Division which you can read all about by searching #CustomPartMarking and #ContractMarking. We need to service companies with a multitude of complex requirements and we are not going to talk a customer out of a Dot Peen Marking System to sell a Laser as a Laser Company would and vice-versa. We will provide you with the solution that is right for you meeting your specifications and keeping you within your budget.
So to summarize, we are a complete Marking Systems & Services Solutions company and we are very proud of all we have accomplished over the years and thankful for the thousands of customers who choose to have us support their Product Identification processes.
If you have any questions about how we might be able to assist you, please contact our Part Marking Specialists for more information.
T: (905) 639-0909
W: millenniumsignatures.com or
#PartMarking #Engraving #DotPeenMarking #DotPeen #LaserMarking#Marksman #MillenniumSignatures #MarkingProducts #MarkingDevices#AutomatedMarking #CustomInks #CustomNameplates #ChemEtch
#PermanentMarking #MarkingMethods #MarkingSystems #PartIdentification#JeffGuenther
#VibroMarking #FibreLaser #ChemicalEtching #PartMarkingSpecialists#SteelStamp
Our customers provide us with all the unique specifics they are expected to follow when marking their customer’s parts and send them to us to make it happen. We understand the importance of “Low Stress” Marking and how it’s often necessary to meet or not exceed a certain marking depth for example. You can trust Millennium Signatures to review your specification thoroughly and consult with you before marking your parts. You can take comfort knowing that we can work from your drawings.
We can produce a “First Article” for your review or we can use good high-quality Digital Macro Photography to take a series of photos of the First Article Component for inspection sent electronically by e-mail. We don’t start marking your parts until you’ve signed off confirming you like the results we’ve achieved. For almost 50 years, we’ve spent every day helping people get the best marking possible on their parts!
We have several clients that fly batches of parts halfway around the world to make sure their challenging requirement are marked properly.
Contact our Part Marking Specialists to discuss why allowing our Custom Part Marking Division to mark some of your parts for you might be highly beneficial especially if you’re in the market to purchase equipment for your own in-house processing.
T: (905) 639-0909