TECHNICAL MARKING

Is part marking technical? It can be.

At Millennium Signatures Marking Systems Inc., our whole world revolves around effective Part Marking Systems, Services and Solutions daily. Some Marking requirements are quite simple, based mostly around appearance and not being easily removed. However, for 30 years we have specialized in supporting The Aerospace, Nuclear and Medical-Surgical Industries among many other industries with meeting their more complex and technical marking requirements.
This could mean permanently marking a surface coating without breaching its protective properties. It could mean providing a clean, deep and professional-looking Low-Stress Chemical Etch to depths that would withstand anything from environmental exposure to naturally occurring abrasion for decades on a vital aircraft component.
It means that we are extremely knowledgeable when it comes to providing “Lab Tested & Certified Products” for Nuclear Part Processing ensuring that specific products are to spec on Halides and Chlorides and conform to all the guild lines you’ve been asked to follow.
No matter what your Part Marking requirements might be, contact the Part Marking Specialists at Millennium Signatures. Allow our team to get you your best possible mark, time and time again…
Contact us toll free (833) 219-1212
Local (905) 639-0909
E: info@millenniumsignatures.com
W: www.millenniumsignatures.com

#TechnicalMarking #Etching #Engraving #PartMarking #ContractMarking #PartMarkingSpecialists #NameplateManufacturing #LaserMarking #LaserEngraving #DotPeenMarking #Marksman #MillenniumSignatures #MarkingProducts #LowStressMarking #MarkingInks
#MarkingServices #MarkingSystems

FREE PICK-UP & DELIVERY

Millennium Signatures Burlington, Ontario Facility is now offering FREE PICK-UP & DELIVERY on Custom Part Marking Services of $500 or more to our clients in the following areas:

  • Stoney Creek
  • Hamilton
  • Brantford
  • Ancaster
  • Dundas
  • Flamborough
  • Waterdown
  • Burlington
  • Oakville
  • Milton

Have the Part Marking Specialists at Millennium Signatures do your Chemical Etching, Engraving, Laser MarkingStamping, Laser Sintering and Dot Peen Marking for you. We have over 50 years of experience, we are equipped with the best technologies in the industry and we offer a very high-quality service with fast turnarounds. Make sure that you’re making your best impression when it comes to the product you put before your customers. 
Millennium Signatures can make it easy! 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and 
marksmanmarkingsystems.com

#ContractMarkingServices #PartMarking #CustomPartMarking
#Etching #Engraving #SteelStamping #LaserMarking #MilSigMarking#ContractMarking #PartMarkingSpecialists #ProductIdentificationServices
#EngravingSouthernOntario #LaserPartMarking #VibroPeenMarking #MarkingServices#MarkingProducts #MarkingMethods
#MarkingDevices
#MarkingSystems

WAIT!

Marking Systems, Marking Products, Marking Devices, Marking Methods, Marking Solutions, Part Marking, Product Identification, Part Traceability, Chemical Etching, Etching, Stamping, Permanent Marking, Engraving, QR Code Marking, 2D Marking, Dot Peen Marking, Marksman, Millennium Signatures, Custom Inks, Marking InksWe really are a Manufacturer’s “One Stop” for Marking Systems & Services. Millennium Signatures has over 50 Years of experience helping people get their parts marked with precision, speed and efficiency. Working with all industries including Aerospace, Nuclear, Medical/Surgical, Automotive Oil & Gas, The Steel Industry and more. From a very basic hand-stamp you strike with a hammer, through to fully automated Laser Marking Technology, we have solutions to fit every requirement. We also provide a dynamic range of services to support your unique requirements.

Contact our Part Marking Specialists at Millennium Signatures Marking Systems for more information on how we can support your applications. 
T: (905) 639-0909 
E: info@millenniumsignatures.com or
W: millenniumsignatures.com or
marksmanmarkingsystems.com

#MarkingSystems #MarkingProducts #MarkingDevices #MarkingMethods#MarkingSolutions #PartMarking #ProductIdentification #PartTraceability#ChemicalEtching #Etching #Stamping #PermanentMarking #Engraving#QRCodeMarking #2DCodeMarking #DotPeenMarking #Marksman#MillenniumSignatures #CustomInks #MarkingInks

CONTRACT PART MARKING

At Millennium Signatures Marking Systems we work daily with manufacturers from all industries to access their part marking requirements and supply them with the right equipment and keep them operational. However, we also provide Custom Part Marking Services or “Contract Marking” as its often referred to by some. Sometimes, especially when volumes are not very high, it’s easier for a manufacturer to send their parts to us and allow us with our nearly half a century of experience and a wide range of equipment and tooling to mark their parts for them. We do the work quickly and efficiently and always provide a First Article part or photo as per the clients request for inspection before the lot is processed no matter how large or small. 
It also serves a second very valuable purpose. If you are considering buying technology, we can use the technology you are most interested in to mark your parts. Yes, you pay for the service, but in the end, after one batch or twenty (20) batches you will have complete confidence in the systems we use because what we use, is what we sell. You will know the parts meet your customer’s specifications and when you invest in the equipment you will be entirely certain that it will do the job you expect. Also, any jigs, fixtures, artwork, layouts and programs that we develop when processing your parts are yours when you purchase. This way your in full production from Day 1 when your System is delivered. It serves a lot of companies very well when they are unsure about a process, or time is of the essence. You will hit the ground running with this unique way of buying your new Marking Technology.
Contact our Part Marking Specialists for more information on what we can do specifically for you. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com
marksmanmarkingsystems.com

 

Custom Part Marking Services!

Have you ever considered outsourcing your part marking? What if you could get you parts turned around very quickly and marked to specification by Part Marking Specialists using the corresponding process/technology with a fixed cost per part?
It’s completely possible and is part of the everyday activity at Millennium Signatures Marking Systems Inc.
We have hundreds of clients who sent in both simple and very challenging part marking requirements from all over North America who just want their parts done right, using the best technology and love our service.
We can process a couple parts or we can process thousands of parts. There is no job too big or too small. 
We can do Rotary Application work (Circumferential Marking) we can accommodate almost any material. We are very accustomed to working with Aerospace, Nuclear and Military Marking Specifications. Contact our Part Marking Specialists today via our general inquiry line at (905) 639-0909 or by e-mail at info@millenniumsignatures.com

Processed we can provide include:
> Galvo Driven Fibre & CO2 Marking
> Electro-Chemical Etching
> Computerized Dot Peen Marking
> Solid Die Steel Stamping
> Engraving

Visit our websites:
www.millenniumsignatures.com
www.marksmanmarkingproducts.com

CUSTOM PART MARKING SERVICES

HISTORY

Millennium Signatures Marking Systems Inc. has an extensive history of selling and supporting Part Marking Technologies or Traceability Systems to the Manufacturing sector going back as far as 1972. Despite that its principal business is to sell, integrate and support the various methods of marking, we also have a very successful Custom Part Marking Division which has been servicing hundreds of clients for almost 15 years now. We have taken our extensive knowledge of Part Marking practices and our impressive range of equipment and made our services open to any clients who do not wish to invest in the technology for one reason or another or who wish to essentially get their products out onto the field and trial the marking results before committing to a process. There are many advantages to outsourcing your marking even if just initially. Let us do the hard work for you.

EXPERTISE

Those staffing the Millennium Signatures Custom Part Marking Division have extensive knowledge of how to work the various technologies and work to even the most rigid specifications. We can take on the marking of complex part configurations much more effectively that someone new to the process. Our pricing is very effective, and our turn-around times are said to be “excellent” based on feedback from our existing client base. Some of our clients bring their parts to us because they’re volumes are too low to justify an equipment purchase, others just don’t have the time or expertise. However, our Custom Part Marking Services provides another very valuable option for those considering buying their own equipment.

ADVANTAGES

If you send your parts to Millennium Signatures Marking Systems for processing, we will design proper fixturing that will positively locate and secure your part during the marking process. We will create layouts and programs allowing the chosen technology to execute the marking sequence properly and we will always provide First Article Samples or detailed photos to the client before proceeding with marking a batch of their parts. You can pay us to mark a single batch of your parts or you can bring us batches of parts for marking for years and years. When you’re ready to make a purchase, Millennium Signatures will not only outfit you with the proven hardware selection we use to process your parts, but we will bring our NEW equipment to your facility, install it and train your operators. The beautiful thing is that we will hand over all the fixtures, programs, layouts, stencils, artwork or any other production aids that we used to mark your parts, so you are now instantly in production. You will have absolutely everything you need to make the perfect impression from the time we walk out of your facility. Going about it in this way allows you to get the marking you need to be done (by professionals), it allows you to see and experience the results before committing to any significant cash outlay and there is never any expectation of an equipment purchase. However, if you do you will know you are selecting the right equipment for the job and you will be provided with absolutely EVERYTHING you need to get started.

PROCESSES

Our Custom Part Marking Services Division offers the following technologies which can be used to mark your parts, Electro-Chemical Etching, Engraving, Computerized Dot Peen Stamping, Ink Marking and both Fibre and CO2 Laser Marking. If you are not sure which technology is best for your application, contact our Part Marking Specialists at info@millenniumsignatures.com or by phone at (905) 639-0909 and have us evaluate your application properly and give you our recommendations.

RECOMMENDATIONS

It is strongly recommended that if you are having us process your parts for the first time, that you provide us with extra parts, scrap parts or spares. It is always best to have an actual part that we can set-up and test with before starting to run production on a good batch of parts. If a spare part is not available, it is quite possible we can still get you a perfect marking from the start, but a close second would be to get a sample piece of the very same material and surface condition as the actual parts we would be expected to mark.

If absolutely nothing is available, it is likely with our expertise that we can still get you a highly acceptable marking the first time, but it’s a much more challenging task for us and it may take longer or the first part or first few parts of that batch may be less than ideal before we manage to dial the settings in just right to secure a perfect marking for all the rest. There is no other alternative, however with all that we see on any given day our chances of getting a highly acceptable mark is much better than for most anyone else.

POLICIES

We often see hundreds and sometimes thousands of parts processed in our facilities each day. We have an unbelievable record for accuracy and acceptability among our clients, but things can happen for a multitude of reasons ranging from very confusing instructions from clients to inconsistencies in the product to hardware/software failures and on occasion even human error. We have created a process whereby we evaluate the client’s job, we review the materials sent. We prepare a sample and we either send the sample to the client for an approval (if time permits) or in most cases, we are asked to take good quality close-up images of the marking results and transmit them electronically to our clients for review and approval before proceeding onto multiple parts. If an error takes place that is deemed to be the fault of Millennium Signatures Marking Systems role in the processing of parts, Millennium Signatures limits its liability to the cost of remarking parts only. Millennium Signatures Marking Systems Inc. is to be in no way held responsible for the costs associated with removal of unwanted markings, recoating, reworking or replacement of customer supplied parts. There is simply too many variables and an extreme range of different products and circumstances for Millennium Signatures to take on such responsibility. Given, such circumstances, our team takes our responsibility very seriously and treats all customer supplied components with the highest levels of care and consideration.

PACKAGING & HANDLING

Please consider that we appreciate that expensive parts that are time-consuming to produce need to be protected and need to be transported carefully. Out of respect to our clients, we go through a series of procedures to ensure that our client supplied products are handled in such a manner that accidental dropping or scratching etc. is minimized if not eliminated. Our processes include handling the part as little as possible, working over anti-fatigue matting on floors and workbenches to cushion any unexpected impacts. We take the parts from any protective packaging, mark the part to specification and return immediately to the same packaged state they are received unless instructed in writing to do otherwise. Our fixturing is custom made on-site out of Plastics, Acrylics and Nylons to prevent scratching or scuffing of parts while being processed. We even wear gloves and can use a lint-free microfibre polishing cloths to clean up parts of any fingerprints if they are decorative parts such as chrome fixtures etc.

CUSTOM MARKING REQUESTS & INFORMATION

If you are thinking of having our Part Marking Specialists process some of your parts for you, please call us at (905) 639-0909 or send us an e-mail at info@millenniumsignatures.com. Allow us to answer your questions, quote on your requirements and discuss your special requirements. We see all kinds of unique requirements daily and we are confident we can accommodate yours.

 

Marksman Website

This website is dedicated entirely to our Marksman Line of Computerized Dot Peen Marking Equipment. It presents a great deal of information on all our models including our Bench Top Markers, Hand-Held Portable Markers and our Integrator Series Compact Marking Heads for Assembly Line and Automated Cell applications. 
This site is dedicated just to this one product line and will be a great help to those looking to purchase pin Marking technology as well as those looking for supporting documentation, specifications and dimensions etc. 
We are constantly expanding to accommodate the demand as Marksman has become very popular throughout the USA, Canada and Mexico. Customers report that the quality, capability and reliability for the money spent is exceptional. For more information on the Marksman Series Marking Systems or any Part Marking Technology, please contact our Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
Tel: (905) 639-0909
E: info@millenniumsignatures.com

#PartMarking #MarkingProducts #Engraving #MarkingTechnology #Etching#DotPeen #PinScribing #PinMarking #MarkingMethods #MarkingSystems#MillenniumSignatures #PortableMarking #ImpactStamping #JeffGuenther#PermanentMarking #MarkingSystems #LowStressMarking #LaserMarking#ChemicalEtching #AcidEtching #ChemicalEtch #PaperStencils#MarkingInks

MACHINE-READABLE CODES

Did you know that the Marksman Computerized Dot Peen Marking Technology from Millennium Signatures Marking Systems Inc. gives you the ability to mark your parts with 2D Barcodes, Military Spec UID Codes and QR Codes as well?

2 DIMENSIONAL CODES (2D)
Marking a 2D Code directly onto your part using our Computerized Dot Peen or Galvo Driven Laser Processes allows you to enter data such as work order #’s, Part #’s Lot #’s, Date Codes, pretty much any data at all into the system and have it automatically convert that data into square code that our equipment will allow you to permanently mark onto your parts. This code can be scanned using just about any of today’s readily available scanning technology and even very reliably with free apps, you can download for your smartphone cameras. This eliminates the concerns for labels coming off and potentially losing track of what revision of part you actually hold in your hand. It will always be there and easily accessible. It makes it very easy to track and inventory parts and can be very helpful in communicating with processes as they travel through automated production lines. For example, you can have parts scanned as they go through a process and rejected if parts should somehow become mixed or parts that are a fail can be marked to permanently confirm such important details.

UID CODES
UID Codes are a unique format of this 2Dimensional (2D Code) Technology that has been designed by the Military for their products and is often expected of manufacturers who are bidding to get such contracts that they will have the capability to mark the parts they would produce using this unique 2D Symbology.

QR CODES
QR Codes can be equally powerful, perhaps even more so in many ways. 
A QR Code is essentially a Hyperlink to a URL Address or File. For example, if you host your QR Code with Millennium Signatures or even through other sources, you can permanently print a small square code onto your part that will remain there long after any sticker, plate or other methods of marking would be lost due to any one of several variable elements of conditions. 
When scanning this code, it can immediately pull up a website or take you to a drawing or a document such as an entire manual potentially hundreds of pages of content if need be. There is really no limitations.
As long as that code is being hosted, the scanning of the code can instantly link anyone it’s a Barcode Scanner or Smartphone with a wealth of information about that part or product and it’s all controlled by you.
This information could even be changed after the mark is made potentially. Allow us to explain…..

POSSIBLE SCENARIOS
You build an assembly for Natural Gas Furnaces and there is some information such as exploded parts view, parts number listing and some installation and safety guidelines you always want available to your client. 
This means when it’s NEW out of the box of when being pulled out of a 20-year-old Furnace under repair. You completely control what information is instantly (almost magically) provides to your customer when scanned. 
However….. 4 years after production of this part, it is determined that there is a defect in the parts from manufacture or there is some reason to recall the parts. It is possible to redirect where the link that code represents a different destination or a REVISED or UPDATED destination or document. For example, a technician in the field could now remove this part and scan it with his cell phone only to learn immediately that there is a recall notice out on that part and instructions on what to do about it as a result. It is incredibly powerful if you know how to use it to its full potential.

Both Millennium Signatures Galvo Driven Laser Etching / Engraving Technologies and our Marksman Series Computerized Dot Peen (Impact Stamping) process’ can provide such markings. The beautiful thing about these Codes is not only are they so easy to create and apply to the part, they are also very permanent. If you pull a dirty, greasy part of a piece of equipment, just give it a wipe off or a scuff with a Scotch Brite Abrasive Pad or something similar and give it a scan. It’s permanently on the surface of the metal, plastic, porcelain or almost any material and will almost always produce for you when needed.

For more information on these Marking Technologies and the Systems we sell allowing you to put these markings on your parts, contact our Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
We have facilities in Buffalo NY, USA and Burlington ON, Canada and we are currently in the process of establishing facilities in Mexico.

Main line for inquiries
Tel: (905) 639-0909

E-mail Inquiries:
info@millenniumsignatures.com

Head Office Hours:
Monday through Friday
8:30am – 4:30pm (Eastern Standard Time)

#2DCodes #QRCodes #UIDCodes #CodeMarking#BarCodeScanning #2DCodeMarking#MarkingMethods
#MarkingProducts #JeffGuenther
#MarkingTechnology #Marksman
#TYKMAElectrox #GalvoLasers #DotPeenMarking#PermanentMarking #QRCodeMarking#MillenniumSignatures #Etching#PartMarkingServices #Engraving #PartTraceability#PartIdentification
#MetalMarking

PERMANENT MARKING

Hand-Held Portable Marking

A COMPUTERIZED DOT PEEN MARK
Most manufacturing operations these days need to receive their certified materials in and start marking the raw materials as it enters the building and maintains that identification through every step of the manufacturing process. In years past it’s been a challenge to adapt to these more demanding requirements for traceability, but there is some good news…

PORTABLE DESIGNS
New technology is being developed in the Marking Systems Industry all the time to allow marking to be done easier, faster and more reliably. Let’s focus on the NEW Marksman Series MKP-054 Hand-Held Portable Low-Stress Indent Marker by Millennium Signatures Marking Systems Inc. Traditionally most Marking Systems are a bench-top or floor mount station that you bring your parts to for processing, but this is not always possible and with some of the latest Hand-Held Technologies you can easily walk over to large lengths of structural steel or tubing etc., or harder to reach locations atop large fabrications and pull the trigger on a comfortable, lightweight marking head and in just a few seconds you’re done! Beautiful, clean looking, easy to read information such as Heat Numbers, Certification ID Numbers, Purchase Order Numbers’ etc., are permanently stamped into your material.

COMPLETELY CORDLESS
This new technology does not even require any umbilical cables for delivering power and data to have to manage as you move from piece-to-piece. 
These systems are battery powered by Heavy Duty 6.0amp Hour Batteries as you would find in Bosch Cordless Drills and their other power tools.
The variable data you wish to mark can be delivered to the Marking Head instantly using Bluetooth Technology direct from your PC or a smartphone using a free downloadable app. 
You also have the option of plugging a mini keyboard directly into the Portable Marking Head and entering the information directly using a small LCD Screen on the Marking Head to verify the accuracy of the information you’ve entered. 
These systems have been in the field now for just over 2 years and we are getting great feedback. Despite most customers choose to start with two (2) battery packs so one can be charging while the other is in use, reports indicate that they are getting more than 2-3 hours of near continuous marking out of a pack that only takes 20 minutes to charge.

CARRYING CASE
These systems are lightweight and comfortable to use. They come with custom carrying cases with precision cut foam inserts to keep your equipment and accessories such as batteries and charger together and safe when not in use.

2D & UID BARCODES / QR CODES
With our equipment you’re not limited to marking just Alpha/Numeric Text in a range of sizes and fonts, you can also add Logos and both 2D and QR Codes to your parts that are perfectly scannable allowing you to track your material faster than ever before.

TUNGSTEN CARBIDE MARKING TIPS
Given that the only part to require periodic sharpening or repair under normal use is the Marking Stylus, this equipment has an EXCELLENT cost of ownership ratio to be considered. 
It’s an inexpensive way to give the flexibility and versatility needed by your staff to ensure they have the capability to log and track your materials from the time they enter the receiving department doors, right through until the finished product is shipped to your client.

For more information on this Marksman Series MKP-054 Portable Dot Peen Marking System and our other technologies, please contact one of our Part Marking Specialists in our main inquiry line at (905) 639-0909 or by e-mail at info@millenniumsignatures.com
We have facilities in Buffalo NY, USA and Burlington ON, Canada to help with all of your inquiries.

Also keep an eye open for our HELPFUL MARKING TIPS that are routinely posted on Facebook, Instagram and LinkedIn on a regular basis that will provide little-known facts about our equipment and techniques for getting better results etc. Please feel free to follow us.

#MarkingExperts #MarkingMethods #Engraving #Etching #DotPeenMarking#PinMarking #PinStamping #StylusMarking #ComputerizedMarking #MarkingMethods  #MarkingProducts #PartMarkingSpecialists#PartIdentification #CustomPartMarking #LowStressMarking#PermanentMarking #MarkingSolutions #MarkingMachines #PermanentID

The Marksman MKP-054 Portable Hand-Held

The Marksman MKP-054 Portable Hand-Held Battery Powered Part Marking System with Bluetooth is an incredible success.! We constantly sell out of these systems cause they are very cost effective and work perfectly. On the market for 16 months now, this Part Marking Technology is gaining in popularity like nothing we’ve ever seen before. Contact our Part Marking Specialists to learn more about what this system can do for the traceability of your raw materials and finished products.
Tel: (905) 639-0909
E-mail: info@millenniumsignatures.com