Millennium Signatures Burlington, Ontario Facility is now offering FREE PICK-UP & DELIVERY on Custom Part Marking Services of $500 or more to our clients in the following areas:
Have the Part Marking Specialists at Millennium Signatures do your Chemical Etching, Engraving, Laser MarkingStamping, Laser Sintering and Dot Peen Marking for you. We have over 50 years of experience, we are equipped with the best technologies in the industry and we offer a very high-quality service with fast turnarounds. Make sure that you’re making your best impression when it comes to the product you put before your customers.
Millennium Signatures can make it easy!
T: (905) 639-0909
W: millenniumsignatures.com and marksmanmarkingsystems.com
Our team goes to great effort to review our customer’s instructions in great detail and always get a First Article Photo approved before processing to give our customers EXACTLY what they want on their parts.
Contact the Part Marking Specialists at Millennium Signatures Marking Systems if you are looking to purchase Marking Technology for your shop or need to have parts processed for you.
T: (905) 639-0909
A bit about the services we offer. As Part Marking Specialists, we spend all day, every day evaluating various types of parts of all shapes, sizes and materials being manufactured to various industry and military specifications. Our core business is to assist our customer with determining which of our many Marking Systems is ideally suited for their specific needs and getting them set-up with it.
However, with such an accumulated wealth of knowledge and experience dating back almost 50 years, we have made Custom Part Marking or “Contract Marking” a service we’ve offered for more than 18 years now and it’s become a huge part of our business!
We’ve equipped a division with all the high-end pieces of equipment and technology we manufacture and sell along with an in-house artwork department. We can handle pretty much any part marking task you can throw at us. We have several Fibre Laser Marking Technologies, we have CO2 Lasers, we have a whole range of Computerized Dot Peen Marking Systems with various capabilities from DEEP MARKING to Circumferential or “Cylindrical” Marking capabilities. We have Electro-Chemical Etching and make Custom Stencils right on-demand in-house. We do engraving and stamping. We do Computer Controlled Low-Stress Scratch Marking or Scribing. We have a LOT of capability and most importantly a wealth of Experience & Talent in-house to process your parts exactly as needed and with very fast turn-around. Next day in most cases!
One of our most popular offerings is a program that combines Custom Part Marking Services with a desire to make an equipment purchase. We have our client give at least a batch of your production parts for processing initially. Yes, you pay us to mark them but we will design and create effective positive locating jigs and fixtures for you. We will do the application testing and get you exactly the great results you have in mind and we will set-up Marking Layouts optimized for higher throughput applications, the graphics and the programs for you. We will process parts for you once or as often as you’d like until you are ready to have the same equipment we are using in our Custom Marking Center places on your factory floor. We will have gotten the results you want and you will have already gotten feedback from your colleagues and clients. We will have worked out the fine details of any new process set-up and when you decide you want a brand new version of the same on your shop floor, we will give you the programs, fixtures, settings, EVERYTHING needed to start production marking immediately!
We are told often that the experience is a smart way to buy things. It’s a smooth process that gives the buyer total confidence in their purchase and certainly a very effective way to introduce and start using a new process.
We are able to mark almost anything. We are not very limited by part size, weight or material. We have a lot to offer. Contact our Part Marking Specialists at Millennium Signatures Marking Systems and ask about what we can do for you.
T: (905) 639-0909
W: millenniumsignatures.com or marksmanmarkingsysrems.com
Our customers provide us with all the unique specifics they are expected to follow when marking their customer’s parts and send them to us to make it happen. We understand the importance of “Low Stress” Marking and how it’s often necessary to meet or not exceed a certain marking depth for example. You can trust Millennium Signatures to review your specification thoroughly and consult with you before marking your parts. You can take comfort knowing that we can work from your drawings.
We can produce a “First Article” for your review or we can use good high-quality Digital Macro Photography to take a series of photos of the First Article Component for inspection sent electronically by e-mail. We don’t start marking your parts until you’ve signed off confirming you like the results we’ve achieved. For almost 50 years, we’ve spent every day helping people get the best marking possible on their parts!
We have several clients that fly batches of parts halfway around the world to make sure their challenging requirement are marked properly.
Contact our Part Marking Specialists to discuss why allowing our Custom Part Marking Division to mark some of your parts for you might be highly beneficial especially if you’re in the market to purchase equipment for your own in-house processing.
T: (905) 639-0909
At Millennium Signatures Marking Systems we work daily with manufacturers from all industries to access their part marking requirements and supply them with the right equipment and keep them operational. However, we also provide Custom Part Marking Services or “Contract Marking” as its often referred to by some. Sometimes, especially when volumes are not very high, it’s easier for a manufacturer to send their parts to us and allow us with our nearly half a century of experience and a wide range of equipment and tooling to mark their parts for them. We do the work quickly and efficiently and always provide a First Article part or photo as per the clients request for inspection before the lot is processed no matter how large or small.
It also serves a second very valuable purpose. If you are considering buying technology, we can use the technology you are most interested in to mark your parts. Yes, you pay for the service, but in the end, after one batch or twenty (20) batches you will have complete confidence in the systems we use because what we use, is what we sell. You will know the parts meet your customer’s specifications and when you invest in the equipment you will be entirely certain that it will do the job you expect. Also, any jigs, fixtures, artwork, layouts and programs that we develop when processing your parts are yours when you purchase. This way your in full production from Day 1 when your System is delivered. It serves a lot of companies very well when they are unsure about a process, or time is of the essence. You will hit the ground running with this unique way of buying your new Marking Technology.
Contact our Part Marking Specialists for more information on what we can do specifically for you.
T: (905) 639-0909
W: millenniumsignatures.com marksmanmarkingsystems.com
Helping you mark you products with clean, permanent and professional looking results is what we do! Soon we will be exhibiting at the Eastec 2019 Show in Springfield Mass. There, we will be featuring our Marksman Series Products. The best built, best priced and best supported Computerized Dot Marking Equipment in a variety of formats including traditional Bench-top Systems, Compact Universal Mount for Integration Applications, Rotary Systems for all your Circumferential Part Marking applications and our VERY popular Cordless Hand-Held Battery Operated Portable Series that communicates from your Phone, Mobile Device or Laptop using Blue Tooth Technology. If you have small precision machined components or large fabrications, contact us for the best ways to get you parts marked with the required information. Product Identification is our focus for over 50 Years now.
Contact our Part Marking Specialists to learn more about all the Technologies we sell, service and support. We provide many Custom Part Marking Services as well. Call us at (905) 639-0909 E-mail is at email@example.com This will connect you with our facilities in Burlington, Ontario Canada and Buffalo NewYork, USA