Is part marking technical? It can be.
At Millennium Signatures Marking Systems Inc., our whole world revolves around effective Part Marking Systems, Services and Solutions daily. Some Marking requirements are quite simple, based mostly around appearance and not being easily removed. However, for 30 years we have specialized in supporting The Aerospace, Nuclear and Medical-Surgical Industries among many other industries with meeting their more complex and technical marking requirements.
This could mean permanently marking a surface coating without breaching its protective properties. It could mean providing a clean, deep and professional-looking Low-Stress Chemical Etch to depths that would withstand anything from environmental exposure to naturally occurring abrasion for decades on a vital aircraft component.
It means that we are extremely knowledgeable when it comes to providing “Lab Tested & Certified Products” for Nuclear Part Processing ensuring that specific products are to spec on Halides and Chlorides and conform to all the guild lines you’ve been asked to follow.
No matter what your Part Marking requirements might be, contact the Part Marking Specialists at Millennium Signatures. Allow our team to get you your best possible mark, time and time again…
Contact us toll free (833) 219-1212
Local (905) 639-0909
#TechnicalMarking #Etching #Engraving #PartMarking #ContractMarking #PartMarkingSpecialists #NameplateManufacturing #LaserMarking #LaserEngraving #DotPeenMarking #Marksman #MillenniumSignatures #MarkingProducts #LowStressMarking #MarkingInks
Think of Millennium Signatures Marking Systems first when the need to identify parts and product arises. Millennium Signatures is not only a supplier of the best Marking Systems the Marking Industry has to offer, but also provides highly efficient Custom Part Marking Services too. When it comes to any of the following products and services, call Millennium Signatures toll free at (833) 219-1212 or (905) 639-0909 and talk to our Part Marking Specialists about your application.
> Roll Marking
> Chemical Etching Equipment
> Laser Marking Systems
> Custom Engraved Stamps & Dies
> Computerized Dot Peen Marking
> Custom Etched Nameplates
> Engraving Services
> Laser Sintering
> Hand Stamps
> Marking Inks & Solvents
> Dry Ink Pads
> Rubber Stamps
> Mylar Stencils
> Benchtop Laser Marking
> Circumferential Marking
> Arc Marking
> Low Stress Marking
> Indent Stamping
> Deep Laser Engraving
> Etching Electrolytes & Neutralizer
> Steel Insert Type
> Segmented Steel Type
> Roll Dies
> Custom Part Marking Services
Millennium Signatures Burlington, Ontario Facility is now offering FREE PICK-UP & DELIVERY on Custom Part Marking Services of $500 or more to our clients in the following areas:
- Stoney Creek
Have the Part Marking Specialists at Millennium Signatures do your Chemical Etching, Engraving, Laser MarkingStamping, Laser Sintering and Dot Peen Marking for you. We have over 50 years of experience, we are equipped with the best technologies in the industry and we offer a very high-quality service with fast turnarounds. Make sure that you’re making your best impression when it comes to the product you put before your customers.
Millennium Signatures can make it easy!
T: (905) 639-0909
W: millenniumsignatures.com and
#ContractMarkingServices #PartMarking #CustomPartMarking
#Etching #Engraving #SteelStamping #LaserMarking #MilSigMarking#ContractMarking #PartMarkingSpecialists #ProductIdentificationServices
#EngravingSouthernOntario #LaserPartMarking #VibroPeenMarking #MarkingServices#MarkingProducts #MarkingMethods
Our team goes to great effort to review our customer’s instructions in great detail and always get a First Article Photo approved before processing to give our customers EXACTLY what they want on their parts.
Contact the Part Marking Specialists at Millennium Signatures Marking Systems if you are looking to purchase Marking Technology for your shop or need to have parts processed for you.
T: (905) 639-0909
Not only can Millennium Signatures Marking Systems CUSTOM PART MARKING Division (Contract Marking Services) look after all your Part Marking needs, but we can also accommodate your Type II and Type III Anodizing, Heat Treat and Stress Relieving requirements also! That’s right, you can send your parts to us for precision marking services and in many cases, we can accommodate some of the other processes you outsource. Hopefully, we can make things easier for you to buy reducing the coordination of time and multiple destinations. One invoice, very easy! We have 50 Years of experience working to spec!
Contact the Part Marking Specialists at Millennium Signatures Marking Systems and ask about our Contract Marking Services and all that we can do for you!
T: (905) 639-0909
A bit about the services we offer. As Part Marking Specialists, we spend all day, every day evaluating various types of parts of all shapes, sizes and materials being manufactured to various industry and military specifications. Our core business is to assist our customer with determining which of our many Marking Systems is ideally suited for their specific needs and getting them set-up with it.
However, with such an accumulated wealth of knowledge and experience dating back almost 50 years, we have made Custom Part Marking or “Contract Marking” a service we’ve offered for more than 18 years now and it’s become a huge part of our business!
We’ve equipped a division with all the high-end pieces of equipment and technology we manufacture and sell along with an in-house artwork department. We can handle pretty much any part marking task you can throw at us. We have several Fibre Laser Marking Technologies, we have CO2 Lasers, we have a whole range of Computerized Dot Peen Marking Systems with various capabilities from DEEP MARKING to Circumferential or “Cylindrical” Marking capabilities. We have Electro-Chemical Etching and make Custom Stencils right on-demand in-house. We do engraving and stamping. We do Computer Controlled Low-Stress Scratch Marking or Scribing. We have a LOT of capability and most importantly a wealth of Experience & Talent in-house to process your parts exactly as needed and with very fast turn-around. Next day in most cases!
One of our most popular offerings is a program that combines Custom Part Marking Services with a desire to make an equipment purchase. We have our client give at least a batch of your production parts for processing initially. Yes, you pay us to mark them but we will design and create effective positive locating jigs and fixtures for you. We will do the application testing and get you exactly the great results you have in mind and we will set-up Marking Layouts optimized for higher throughput applications, the graphics and the programs for you. We will process parts for you once or as often as you’d like until you are ready to have the same equipment we are using in our Custom Marking Center places on your factory floor. We will have gotten the results you want and you will have already gotten feedback from your colleagues and clients. We will have worked out the fine details of any new process set-up and when you decide you want a brand new version of the same on your shop floor, we will give you the programs, fixtures, settings, EVERYTHING needed to start production marking immediately!
We are told often that the experience is a smart way to buy things. It’s a smooth process that gives the buyer total confidence in their purchase and certainly a very effective way to introduce and start using a new process.
We are able to mark almost anything. We are not very limited by part size, weight or material. We have a lot to offer. Contact our Part Marking Specialists at Millennium Signatures Marking Systems and ask about what we can do for you.
T: (905) 639-0909
W: millenniumsignatures.com or
#ContractMarking #CustomPartMarking #MarkingSpecifications#LowStressMarking #ChemicalEtching #Engraving #PartMarking#Marksman #MillenniumSignatures #LaserMarking #MilSigMarking#MarkingProducts #MarkingDevices #MarkingMethods #MarkingProcesses#MarkingServices #PermanentMarking #ProductionMarking
Our customers provide us with all the unique specifics they are expected to follow when marking their customer’s parts and send them to us to make it happen. We understand the importance of “Low Stress” Marking and how it’s often necessary to meet or not exceed a certain marking depth for example. You can trust Millennium Signatures to review your specification thoroughly and consult with you before marking your parts. You can take comfort knowing that we can work from your drawings.
We can produce a “First Article” for your review or we can use good high-quality Digital Macro Photography to take a series of photos of the First Article Component for inspection sent electronically by e-mail. We don’t start marking your parts until you’ve signed off confirming you like the results we’ve achieved. For almost 50 years, we’ve spent every day helping people get the best marking possible on their parts!
We have several clients that fly batches of parts halfway around the world to make sure their challenging requirement are marked properly.
Contact our Part Marking Specialists to discuss why allowing our Custom Part Marking Division to mark some of your parts for you might be highly beneficial especially if you’re in the market to purchase equipment for your own in-house processing.
T: (905) 639-0909
Millennium Signatures is very excited about the performance and success of our MKP-054 Bluetooth Handheld Portable Marking System.
We have a very effective adjustable Magnetic Base attachment now which has proven far more effective than competitive systems. It clamps down securely on your Steel Fabrications and secures very well while the Computerized Marking Head puts very clean, permanent identification into the metal exactly as per your layout program which is created and sent from a nearby Mini-Controller or even our Cell Phone App which sends all the information over instantly using Bluetooth Technology.
We maintain this equipment in stock at our US and Canadian Facilities.
Furthermore, we provide fast efficient response to your inquiries and the systems are fully supported with a great technical staff that we are very proud of. Give us a try!
Reach out to our Part Marking Specialists using the following methods