Portable Models

MKP-054

This product is particularly exciting because it will change the way that companies with large, heavy components mark their parts. As with our existing MK-054P Hand-Held Portable Marking System which offers a very well designed compact Marking Head with an easy to use Hand-Held Pistol Grip & Trigger design on a 5m (16.4ft.) umbilical cord allowing operators to mount the compact controller on a vertical support column or wall within the facility and reach out easily to large identify heavy parts such as valves or tubing on pallets and properly stamp the required identification on their parts. The NEW MKP-054 Hand-Held is battery operated! It is completely wireless and uses either Bluetooth Technology or a mini-keyboard plugged right into the side of the Marking Head itself to input the data! It’s fast, it’s easy, and it makes accessing challenging areas on large fabrications simple! Permanently identify final serial, part, and drawing numbers etc., onto the part in sharp, precise looking characters to a depth of approximately 0.15mm (0.006”).

The NEW MKP-054 Portable uses a commonly found Bosch 18V Lithium-Ion 5.0 Amp Hour Battery plugged into the end of the Pistol Grip Handle as you would with most Cordless Drills, Drill Drivers, and other common Power Tools today. Our MKP-054 Wireless System comes complete with one of these batteries and a charger. These batteries are not unique to the Marksman Series Product or Millennium Signatures and while we keep them in stock and readily available at all our locations, you can purchase additional batteries and chargers locally from most Hardware Stores and Tool Suppliers such as Home Depot and Lowes among others.

These NEW markers can deliver the same impact and the same precision as any other Marksman Marking Heads and the battery life is proving to be very acceptable, lasting for upwards of 5 hours of continuous marking. The Marking Head is equipped with a small LCD Screen that will allow you to verify the variable information being input (or transferred) across to the marking head.

In the areas of large fabrication, heavy transmission components, piping, and flanges etc., this is going to change the ease and efficiency of our you track incoming raw materials and outgoing finished products.

Specifications:
- Model is the MKP-054 (Bluetooth)
- Dimensions: 152mm (5.98”) wide x 130mm (5.12”) long x 330mm (12.99”) in overall height
- Marking Area: 70mm (2.76”) X-Axis x 35mm (1.38”) Y-Axis
- Weight (Including Battery + Supporting Fixture): 3.9kg or 8.6 lbs
- Available Character Height: 1.0mm (0.039”) to 30.0mm (1.18”)
- Marking Pin: Electromagnetic Marking Pin
MH-054G

Millennium Signatures’ Marksman Model MH-054G Hand-Held Marking Head has proven to be a very viable option for those who wish to put clean, professional looking marking on large or heavy parts where it is not feasible to handle the part, or present it to a Bench Top system for processing. The MH-054G has a marking field of 50mm x 40mm and is available with a few different stabilizing bases to make marking on Flat Surfaces or Diameters easy and reliable. At a weight of just 4kg, this Hand-Held Marking Head is comfortable and easy to use. It is also equipped with a supporting loop for hanging from one of our adjustable Balancers which are available as an option. These balancers can mount overhead in several ways and provide a safe and convenient way to access and store your Portable Marker when not in use. In addition to balancers, we also offer track solutions that will allow your Hand-Held Portable to travel smoothly across a given distance in your work area while being safely suspended from above.

The MH-054 has a comfortable Pistol-Grip Style handle and Trigger Assembly and is fixed onto a 5m (16’) Umbilical Cable which delivers compressed air for the pneumatic solenoid and data from the MCU-100N Controller that this Marking Head has been paired with. Both the umbilical and the controller has been outfitted with military-grade screw on connectors which provide a strong reliable connection between Marking Head and Controller.

COMBINATION SET-UP: The MH-054G can be used only as a portable marker, but if purchased with our Model T-300 Manual Adjustable Base and Column + Mounting Bracket, the MH-054G can easily be set into the mounting bracket almost like a holster and be used as a fixed marking system on a height adjustable Tool Post which makes marking small parts and nameplates possible.

Specifications:
- Marking Area 48mm (X) x 40mm (Y) or 1.97” (X) x 1.57” (Y)
- Unique Head Design with extremely minimal number of moving parts
- Available upon ordering with Pneumatic or Electric Solenoid
- Dimensions: 13.3cm width (5.24”) x 14.4cm length (5.67”) x 12.0cm Height (4.72”)
- Marking Head Weight – 2.8 kg or (6.17 lbs)
- Air pressure requirements 3.5 MPa (30.0 psi) to 5MPa (72.5 psi)
- Typically supplied standard with the LP-10 Heavy Duty Marking Stylus Assembly
- Supplied complete with Mini-Keyboard, Start/Stop/Reset Remote Interface Box
- System is recommended to be driven using the MCU-100N which supports full Stand-Alone operation (no requirement for PC), however, these controllers are supplied with cabling and software allowing it to connect and controlled through a PC. This also allows you to access databases such as Microsoft Excel and backup data files.
- Electrical Requirements: 115V or 230V, 50/60 Hz
MH-1340G

Like our MH-054G, the Marksman Model MH-1340G Hand-Held Marking Head by Millennium Signatures has proven to be a very viable option for those who wish to put clean, professional looking marking on large or heavy parts where it is not feasible to handle the part, or present it to a Bench Top system for processing. The MH-1340G simply offers a larger marking field than that offered with the MH-054G. The larger MH-1340G has a marking field of 130mm x 40mm and is also available with a few different stabilizing bases to make marking on Flat Surfaces or Diameters easy and reliable.

At a weight of just 3.8kg, this Hand-Held Marking Head is comfortable and easy to use. It is also equipped with a supporting loop for hanging from one of our adjustable Balancers which are available as an option. These balancers can mount overhead in several ways and provide a safe and convenient way to access and store your Portable Marker when not in use. In addition to balancers, we also offer track solutions that will allow your Hand-Held Portable to travel smoothly across a given distance in your work area while being safely suspended from above. Inquire with our Part Marking Specialists about overhead Balancer Options for Portable Marking Solutions.

The MH-1340G has a comfortable Pistol-Grip Style handle and Trigger Assembly and is fixed onto a 5m (16’) Umbilical Cable which delivers compressed air for the pneumatic solenoid and data from the MCU-100N Controller that this Marking Head has been paired with. Both the umbilical and the controller has been outfitted with military-grade screw on connectors which provide a strong reliable connection between Marking Head and Controller. Note: Optional 10m Umbilical Cable Connection is also available.

Specifications:
- Marking Area 120mm (X) x 38mm (Y) or 4.72” (X) x 1.5” (Y)
- Al precision machines components, no plastic or cast components.
- Available upon ordering with Pneumatic or Electric Solenoid
- Dimensions: 21.8cm width (5.24”) x 12.0cm length (5.67”) x 14.4cm Height (4.72”)
- Marking Head Weight – 3.5 kg or (7.72lbs)
- Air pressure requirements 3.5 MPa (30.0 psi) to 5MPa (72.5 psi)
- Typically supplied standard with the LP-10 Heavy Duty Marking Stylus Assembly
- Supplied complete with Mini-Keyboard, Start/Stop/Reset Remote Interface Box
- System is recommended to be driven using the MCU-100N which supports full Stand-Alone operation (no requirement for PC), however, these controllers are supplied with cabling and software allowing it to connect and controlled through a PC. This also allows you to access databases such as Microsoft Excel and backup data files.
- Electrical Requirements: 115V or 230V, 50/60 Hz