MARKING SYSTEMS & SERVICES

Think of Millennium Signatures Marking Systems first when the need to identify parts and product arises. Millennium Signatures is not only a supplier of the best Marking Systems the Marking Industry has to offer, but also provides highly efficient Custom Part Marking Services too. When it comes to any of the following products and services, call Millennium Signatures toll free at (833) 219-1212 or (905) 639-0909 and talk to our Part Marking Specialists about your application.
> Roll Marking
> Chemical Etching Equipment
> Laser Marking Systems
> Custom Engraved Stamps & Dies
> Computerized Dot Peen Marking
> Custom Etched Nameplates
> Engraving Services
> Laser Sintering
> Hand Stamps
> Marking Inks & Solvents
> Dry Ink Pads
> Rubber Stamps
> Mylar Stencils
> Benchtop Laser Marking
> Circumferential Marking
> Arc Marking
> Low Stress Marking
> Indent Stamping
> Deep Laser Engraving
> Etching Electrolytes & Neutralizer
> Steel Insert Type
> Segmented Steel Type
> Roll Dies
> Custom Part Marking Services

IN-HOUSE GRAPHIC ARTWORK AND DESIGN SERVICES

Our core business is to provide manufacturer’s with quality Marking Equipment and Systems to look after all their Product Identification requirements. Second to that is our Part Marking Services component of the business where our highly knowledgeable techs use the many technologies we sell, service and support to mark batches of parts for the customer as a contract service. 
Beyond that we offer Anodizing, Heat Treat and Stress Relieving Services, Sandblasting of small components and Custom Made Positive Locating Jigs & Fixtures. 
Central to many of these services is our in-house Graphic Artwork Department headed up by Carolyn. We can assist you by preparing custom artwork for Fabric Stencils used in Chemical Etching, Logo’s and Barcodes for use with lasers, QRCode Generation for Laser and Dot Peen Marking Technologies and much more. 
Carolyn and her team can help you with all of your Graphic Artwork Needs. 
Contact our Part Marking Specialists and inquire 
T: (905) 510-3361
E: info@millenniumsignatures.com
W: millenniumsignatures.com

EASTEC 2019

We are proud to announce that we are exhibiting at EASTEC 2019 in West Springfield, Massachusetts! Please feel free to stop by our booth #3305 to gather more information on our company, products, and what we can do for you. See you there!

Millennium Signatures Marking Systems will be showcasing our Marksman Series, Computerized Dot Peen / Pin Marking Technology at Eastec 2019 this May in Springfield MA. If you manufacture a product and wish to advance your abilities for tracking your raw materials or the finished product, visit with the Part Marking Specialists at Millennium Signatures to get information on all the latest methods, technologies and services available in the world of Part Marking/Traceability. We specialize in a variety of processes and have over 50 Years of experience 
Contact us at
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com and 
marksmanmarkingsystems.com

CUSTOM PART MARKING or “Contract Marking” as its sometimes called…

      

A bit about the services we offer. As Part Marking Specialists, we spend all day, every day evaluating various types of parts of all shapes, sizes and materials being manufactured to various industry and military specifications. Our core business is to assist our customer with determining which of our many Marking Systems is ideally suited for their specific needs and getting them set-up with it. 
However, with such an accumulated wealth of knowledge and experience dating back almost 50 years, we have made Custom Part Marking or “Contract Marking” a service we’ve offered for more than 18 years now and it’s become a huge part of our business! 
We’ve equipped a division with all the high-end pieces of equipment and technology we manufacture and sell along with an in-house artwork department. We can handle pretty much any part marking task you can throw at us. We have several Fibre Laser Marking Technologies, we have CO2 Lasers, we have a whole range of Computerized Dot Peen Marking Systems with various capabilities from DEEP MARKING to Circumferential or “Cylindrical” Marking capabilities. We have Electro-Chemical Etching and make Custom Stencils right on-demand in-house. We do engraving and stamping. We do Computer Controlled Low-Stress Scratch Marking or Scribing. We have a LOT of capability and most importantly a wealth of Experience & Talent in-house to process your parts exactly as needed and with very fast turn-around. Next day in most cases!
One of our most popular offerings is a program that combines Custom Part Marking Services with a desire to make an equipment purchase. We have our client give at least a batch of your production parts for processing initially. Yes, you pay us to mark them but we will design and create effective positive locating jigs and fixtures for you. We will do the application testing and get you exactly the great results you have in mind and we will set-up Marking Layouts optimized for higher throughput applications, the graphics and the programs for you. We will process parts for you once or as often as you’d like until you are ready to have the same equipment we are using in our Custom Marking Center places on your factory floor. We will have gotten the results you want and you will have already gotten feedback from your colleagues and clients. We will have worked out the fine details of any new process set-up and when you decide you want a brand new version of the same on your shop floor, we will give you the programs, fixtures, settings, EVERYTHING needed to start production marking immediately!

We are told often that the experience is a smart way to buy things. It’s a smooth process that gives the buyer total confidence in their purchase and certainly a very effective way to introduce and start using a new process.

We are able to mark almost anything. We are not very limited by part size, weight or material. We have a lot to offer. Contact our Part Marking Specialists at Millennium Signatures Marking Systems and ask about what we can do for you. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com or 
marksmanmarkingsysrems.com

#ContractMarking #CustomPartMarking #MarkingSpecifications#LowStressMarking #ChemicalEtching #Engraving #PartMarking#Marksman #MillenniumSignatures #LaserMarking #MilSigMarking#MarkingProducts #MarkingDevices #MarkingMethods #MarkingProcesses#MarkingServices #PermanentMarking #ProductionMarking

WAIT!

Marking Systems, Marking Products, Marking Devices, Marking Methods, Marking Solutions, Part Marking, Product Identification, Part Traceability, Chemical Etching, Etching, Stamping, Permanent Marking, Engraving, QR Code Marking, 2D Marking, Dot Peen Marking, Marksman, Millennium Signatures, Custom Inks, Marking InksWe really are a Manufacturer’s “One Stop” for Marking Systems & Services. Millennium Signatures has over 50 Years of experience helping people get their parts marked with precision, speed and efficiency. Working with all industries including Aerospace, Nuclear, Medical/Surgical, Automotive Oil & Gas, The Steel Industry and more. From a very basic hand-stamp you strike with a hammer, through to fully automated Laser Marking Technology, we have solutions to fit every requirement. We also provide a dynamic range of services to support your unique requirements.

Contact our Part Marking Specialists at Millennium Signatures Marking Systems for more information on how we can support your applications. 
T: (905) 639-0909 
E: info@millenniumsignatures.com or
W: millenniumsignatures.com or
marksmanmarkingsystems.com

#MarkingSystems #MarkingProducts #MarkingDevices #MarkingMethods#MarkingSolutions #PartMarking #ProductIdentification #PartTraceability#ChemicalEtching #Etching #Stamping #PermanentMarking #Engraving#QRCodeMarking #2DCodeMarking #DotPeenMarking #Marksman#MillenniumSignatures #CustomInks #MarkingInks

IDENTITY CRISIS?

Millennium Signatures at its roots was Chem-Etch and Stamp going back almost 50 years to 1972. In those early years the company was, a leader in Electro-Chemical Etching and Steel Stamp & Die Processes and still is today. In 1987 the company took on the Distribution, Integration and Servicing of Computerized Dot Peen Marking Technology which was completely NEW at that time. It was in 1990 that a separate division of the company was formed and “Canadian Laser Technologies” was created to focus on designing, building and integrating Galvo based Nd:YAG and CO2 Lasers. 
It was in 2003 that the company invested extensively in new facilities and new products and completely rebranded to become Millennium Signatures Marking Systems. A complete full service solution for all your Part Marking and Product Identification needs. We have accumulated such an extensive client base that we expanded our focus even further and in 2006 we did a deep dive into the formulation of Custom Inks and Solvents (Printing Ink) to support Direct, Offset and Inkjet Marking System use. 
Today we have multiple facilities and deal with manufacturers from virtually every sector of the manufacturing world right around the globe. The bulk of our business is throughout North and South America but we do supply product throughout Europe and many Baltic Countries also. 
Today we still come across long time Etching Customers that did not know we supplied and supported Lasers, likewise some Laser customers were surprised to find we are also one of the leading sources of Computerized Dot Peen Marking Equipment and so on. So we are looking to set the record straight and let everyone know the extensive range of products & services that we provide. We stock everything needed for technical support services on everything we sell and have great technicians throughout North America to support our customers with after sales technical support. 
Today at Millennium Signatures Marking Systems Inc., we specialize in all of the following products and maintain product on the shelf for quick availability. These Products and Services include:
Custom Engraved Steel Stamp & Die, Custom Tooling & Fixturing, Computerized Dot Peen Marking Systems in Bench Top, Portable and Compact Integrator Series Marker formats, Custom Formulated Industrial Inks & Solvents including Aerospace Marking Inks & Polyurethane Protective Top Coat Products. 
We also are highly specialized in Fibre and CO2 Galvo Driven Laser Marking Systems, Electro-Chemical Etching, Custom Cut Stencils, Laser Sintered Signs, Vibro Etch and Scribe Marking Technologies and we are a Manufacturer of Custom Steel & Aluminum Nameplates and high quality Self-Adhesive Labels and Decals. Then of course is our very popular Custom Part Marking Services Division which you can read all about by searching #CustomPartMarking and #ContractMarking. We need to service companies with a multitude of complex requirements and we are not going to talk a customer out of a Dot Peen Marking System to sell a Laser as a Laser Company would and vice-versa. We will provide you with the solution that is right for you meeting your specifications and keeping you within your budget.

So to summarize, we are a complete Marking Systems & Services Solutions company and we are very proud of all we have accomplished over the years and thankful for the thousands of customers who choose to have us support their Product Identification processes.

If you have any questions about how we might be able to assist you, please contact our Part Marking Specialists for more information. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: millenniumsignatures.com or 
marksmanmarkingsystems.com

#PartMarking #Engraving #DotPeenMarking #DotPeen #LaserMarking#Marksman #MillenniumSignatures #MarkingProducts #MarkingDevices#AutomatedMarking #CustomInks #CustomNameplates #ChemEtch
#PermanentMarking #MarkingMethods #MarkingSystems #PartIdentification#JeffGuenther
#VibroMarking #FibreLaser #ChemicalEtching #PartMarkingSpecialists#SteelStamp

WELCOME to our NEW Website!

Millennium Signatures Marking Systems Inc. has had such tremendous success over the past 12 years with the Marksman Series Computerized Dot Peen Marking Technology sold and supported throughout the USA, Canada, and Mexico that we have now built and dedicated its own website to promote and support the Marksman Series products. Thank you for visiting marksmanmarkingsystems.com!

The Marksman Series Products are brought to you by Millennium Signatures Marking Systems Inc. with our main facilities located in Buffalo NY, USA and Burlington ON, Canada. Our products are additionally supported throughout North America by a network of Distributors and Service Technicians. Millennium Signatures Marking Systems Inc. has an extensive history of over 50 years experience in the Marking Products business. More details on the various other Products, Marking Technologies, and Services offered can be found at www.millenniumsignatures.com.

Millennium Signatures Marking Systems Inc. is the home of the Part Marking Specialists. We have been selling, supporting and providing Custom Part Marking services for the following for decades, making us the place to consult with when you have parts to mark!

Our areas of expertise include:

  • Galvo Driven Laser Marking Systems & Part Marking Services
  • Electro-Chemical Etching Equipment Accessories & Supplies
  • Custom Cut Stencils, Peel & Stick Nylon, Mylar, Oil Board, various Metals and more…
  • Computerized Dot Peen Marking Systems and Part Marking Services
  • Custom Made Nameplates including Laser Sintered, Anodized Aluminum, Laser Etched, Screen Printed, Deep Etch & Fill and more…
  • High Visibility
  • 2D and 3D Engraving Services
  • Custom Engraved Steel Stamps & Dyes
  • Roll Marking Technologies
  • Dot Peen & Roll Marking Attachment Tools for CNC Machining Centers
  • Custom Formulated Marking Inks & Solvents
  • Positive locating Nesting Fixtures for various Marking Technologies
  • Custom Pad Printing Services
  • Barcode Scanning & Verification Technologies

Millennium Signatures Marking Systems first started selling and supporting Pin Marking Technology back in 1987. The Computerized Dot Peen Marking Technology has continued to become more versatile and more reliable year after year and what we do with the Marksman Series systems today is simply impressive and at a cost of ownership far below any other indent stamping process that’s ever been offered. The Marksman product has been so well received over the years we have made a huge investment into the inventory we have in place throughout North America and the Technicians we have in place to support the products and consult on integrations into today’s automated manufacturing environment. Millennium Signatures has a long history of working with leading manufacturing firms in primarily the Aerospace, Nuclear, Oil & Gas and Medical & Surgical industries, but we have managed to successfully help companies that manufacture just about any product get clean, professional, long lasting identification permanently on their products.

Thank you for being among the first to visit our NEW site and please be sure to contact any of our Part Marking Specialists should you have any questions by e-mail at info@millenniumsignatures.com or by phone at Tel: (905) 639-0909
www.millenniumsignatures.com