MARKING SYSTEM REPAIRS

At Millennium Signatures Marking Systems we have a 3,000 square foot facility in Burlington, Ontario where we can perform even the most complex repairs to any of the products we sell. We have well-trained Technicians and all the Tools, Instruments and huge inventory of Replacement Parts on-hand in case they’re needed to help you get your Computerized Dot Peen Marking System, Galvo Driven Laser Marking Equipment or Electro-Chemical Etching Machines and so much more back up and operational quickly.
Despite selling some of the most reliable, hardworking equipment the industry has to offer, we often service requests to have old equipment overhauled as a means to support newer equipment as a back-up or pretty much any scenario leaving your company in need of Marking Equipment repairs.
We also service TYKMA Electrox Laser Systems and all Marksman Computerized Dot Peen Marking Systems.
For more information, contact one of our Part Marking Specialists at Millennium Signatures Marking Systems today by calling Toll Free
1-(833)-219-1212 or use our local at (905) 639-0909
You can also e-mail us at
info@millenniumsignatures.com

#MarkingSystems #Marksman #EngravingEquipment #MarkingProducts #LaserMarking
#MarkingMethods #MarkingEquipment #JeffGuenther
#DotPeenMarking #EtchingSystems #PermanentMarking #PartMarkingSpecialists

SCAN YOUR WORK ORDER

MARK YOUR PART. THAT SIMPLE!

We have now made it easier using our Marksman Series Dot Peen Marking Systems to scan a Barcode on a Work Order or Traveller and print the Human Readable data within that code directly onto your part using our App for your Smart Phone or Mobile Device. It’s a process we’ve been able to offer in the past, but never with such speed, ease and simplicity.

Contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. Toll-free at (833) 219-1212 or by using our local at (905) 639-0909.
Inquiries can also be e-mailed to
info@millenniumsignatures.com

#MarksmanMarkingSystems #MarksmanApp #MarkingSystems #MarkingTechnology #MillenniumSignatures #PartMarking #EngravingSystems
 #MarkingMethods #PermanentMarking #DotPeenMarking #PinMarking 
#JeffGuenther #PartMarkingSpecialists

TWO (2) WEBSITES

That’s right! Millennium Signatures Marking Systems actually has two (2) Websites to help you find and learn about the Marking Processes that meet your product identification requirements. One is our main site which is an overview of all of our Marking Products and Services, this can be found at
millenniumsignatures.com. The other is designed specifically to provide content for our Marksman Series Dot Peen Marking Systems and Accessories etc.
This can be found at marksmanmarkingsystems.com

Our Marksman Series Dot Peen Markers are very popular and we hold a huge inventory of new systems, replacement parts and accessories as a result! We will have what you need readily available when you need it!
Check out our websites and contact the Part Marking Specialists at Millennium Signatures Marking Systems by calling (833) 219-1212 toll free from anywhere within North America or by using our local number (905) 639-0909 as required.
We can also be reached by e-mail at info@millenniumsignatures.com

#Marksman #ComputerizedStamping
#EngravingSystems
#MarkingSystems
#MillenniumSignatures
#PermanentMarking
#LowStressMarking
#EngravingServices
#MarkingMethods
#DotPeenMarking
#ContractMarkingServices

 

MKP-054K PORTABLE MARKING

WESTEC 2019
We are at the Westec 2019 Trade Exhibition in beautiful Long Beach California with our Marksman Series Dot Peen Marking Systems
One of the newer items being presented at this show is our MKP-054K Battery Operated Hand-Held Portable Marker complete with built-in Keyboard, Bluetooth communications with a PC or any mobile device using our Free Apps designed for use with IOS and Android-based products.
These systems are durable, lightweight, easy to work with.
Contact our Part Marking Specialists at Millennium Signatures Marking Systems Inc.
Toll Free: 1-(833) 219-1212
Local: (905) 639-0909

WESTEC 2019

Millennium Signatures Marking Systems is exhibiting at this weeks Westec 2019 Trade Exhibition in beautiful Long Beach California.
We are presenting our Marksman Series Computerized Dot Peen Marking & Scribing Equipment.
We are located at booth 850 of the main hall.
Stop by to see us between 10:00am and 5:00pm today and tomorrow and 10:00am and 4:00pm on Thursday.

For more information, contact us at 1-833-219-1212 and speak with one of our Part Marking Specialists.

#MillenniumSignatures
#Marksman #PartMarking #PermanentMarking #MarkingServices #MarkingProducts #MarkingSystems #DotPeenMarking #Etching #Scribing #Stamping #MarkingMethods

JEFF GUENTHER – 30 YEARS SPECIALIZING IN PART MARKING SYSTEMS & SERVICES!

It was 30 years ago, on the morning of August 6th, 1989 that I started working alongside my grandfather in a machine shop. I was not even finished school yet but worked every day even around a class schedule. From that day forward, I prepared blanks and related tooling for Custom Engraved Steel Stamping Dies and other accessories to support various Marking Solutions all intended to make it easier and more efficient for manufacturers to identify their parts professionally and permanently. These technologies have allowed them to build brand recognition and take responsibilities for the quality of their products through barcoding, lot numbering, serialization and other forms of traceability in virtually all industries from Aerospace to Nuclear, Medical-Surgical, Steel Industry, Machine & Tool, Plastics Processing and so much more. 
I have continued to focus my energies in this very same direction every day since. Today, 30 Years later my company Millennium Signatures Marking Systems Inc., continues to provide even the most hi-tech manufacturing companies of today with the latest Marking capabilities and provide integration services. We have also created a very unique “Custom Part Marking Services” division that allows some clients with highly specialized requirements or smaller volumes to draw upon those 30 years of experience and our dynamic range of processes by bringing their parts to us for processing. We have built a procedure that allows us to assess the application, prepare any artwork, necessary fixturing, material handling etc., and mark the customers’ parts to their exact specifications following a fast and efficient “First Article Inspection Process”. We can now mark most customers parts to their complete satisfaction using any one of several technologies cost-effectively and efficiently typically returned next day or in some cases 1-2 day turn-around depending on volumes and the particulars. 
A unique blend of in-house manufacturing and exclusive distribution of some of the very best marking equipment has allowed Millennium Signatures to fill out and offer a dynamic range of high-quality solutions including Galvo Driven Fibre Laser Marking Technology, Computerized Dot Peen Indent Marking & Scribing from our Marksman Series Products and many of our tried & true processes that date back even long before my time such as Electro-Chemical Etching and Custom Engraved Stamping Dies and Inserts etc., plus many more. 
We have come to learn that a large inventory in our business is very important. When manufacturers go off-line with their Part Marking for whatever the reason, they need quality solutions available fast and Millennium Signatures Marking Systems has invested a great deal of time and money into making that possible for our continuously growing list of clients.

For more information on Millennium Signatures Marking Systems Inc., you’re welcome to contact one of our Part Marking Specialists Toll Free at 1-(833)-219-1212 or e-mail the team at info@millenniumsignatures.com
T: (905) 639-0909
W: millenniumsignatures.com
W: marksmanmarkingsystems.com

#JeffGuenther #LaserMarking #Engraving #PartMarkingSpecialists#MillenniumSignatures #FibreLaserTechnology #MarkingProducts#MarkingMethods #PermanentMarking #MarkingSolutions #MarkingExperts#LaserSintering #ChemicalEtching #DotPeenMarking #Marksman

MARKSMAN SERIES MARKING SYSTEMS – EASE OF USE

One of the beautiful things about our Marksman Series Products is its straight forward ease of use. 
We ship these systems throughout North & South America on a daily basis and for those who are not close to one of our distribution partners, someone with no familiarity can be operational and marking parts in 15 minutes with instruction over the phone of by watching short video clips sent by e-mail. Within your first hour, you will know everything you need to know to operate these Marking Machines on a daily basis. 
The interface is a simple 7 step process which you tab from step to step in a clockwise configuration on the stand-alone controllers or from left to right in the case of the optional software for PCs.

– F3 EDIT SCREEN –

1. MARK TYPE
Select the type of Mark you’re looking make ie. Standard LINEAR, RADIAL (Arc), GRAPHIC (PLT), MATRIX (2D/QR Code)

2. X-AXIS 
Select the starting point for the bottom left corner of your first character on your X-AXIS

3. Y-AXIS
Select the starting point for the bottom left corner of your first character on your Y-AXIS

4. ANGLE
Select the angle at which you want your words/image to print. Straight horizontal along the X-Axis is zero 0 degrees

5. CHARACTER HEIGHT
Select the height of the characters you wish to print in this BLOCK in millimetres.

6. PITCH
Select the pitch also known as the compression of the character. If the PITCH is set to the same value as the character height than the character will be a normally proportioned character with 3/4 its height being its width. So if a typical 3mm character is desired, the pitch or (PX ) value should also be set to 3mm. If you are bound by spec to six (6) characters at a stipulated height 3mm but you only have physical room for five (5) and you need to compress the width of characters you could set your height value (CH) at 3mm and your pitch (PX) value at 2.6mm. This will compress the width of the characters some allowing you to fit more characters into a given area.

7. VARIABLE DATA
The last step is actually where you type in the data you wish to print in this BLOCK. In the case of a Barcode, you would type in the content of what the code would ultimately contain and the system will generate the code to contain that data.

Following these 7 easy progressional steps, you can go to the F2 Screen and activate the marking process.

There is the process of saving a layout and recalling or “loading” a previously saved layout. There are some other features such as the F7 Feature allowing you to view your marking layout in relation to the physical limitations of your marking area and a few other features that can be helpful in certain situations, but overall it’s just about that easy.

We have helped hundreds of companies go from opening the box to fully operations from remote locations in as little as 15 minutes and as much as an hour depending on the configuration of the system they are using and their computer skills and familiarity with basic CNC type equipment.

Getting the job done right does not have to be complicated!

For more information on the features and capabilities of our Marksman Series Computerized Dot Peen and Scribing Systems, contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
T: (905) 639-0909
E: info@millenniumsihnatures.com
W: marksmanmarkingsystems.com
or millenniumsignatures.com

#MarksmanMarkingSystems #MillenniumSignatures #DotPeenMarking#ProductTraceability #PermanentMarking #Engraving #MarkingTechnology#MarkingProducts #MarkingSystems #PartMarking
#MarkingMethods #BarcodingMetals

NEW!


Marksman by Millennium Signatures Marking Systems Inc. continues to offer versatility and choice with a dynamic range of equipment. Our MKP-054 Portable Blue Tooth Hand-Held Battery Powered Marking Systems have been a huge success for years, now we’ve integrated a keyboard into the Hand-Held Unit allowing quick editing to be done right there on the unit regardless where you are. You can be up on a large fabricated structure or across the shop floor. 
Our systems have always used Bluetooth Technology to transfer static and variable information to the marking seamlessly from a Laptop Computer, Cell Phone or Tablet using our free App designed for Android or IOS Operating Systems, but now you have the choice to purchase this same equipment with the addition of a built-in keyboard. Marksman remains committed to supplying well built Marking Equipment designed to handle challenging manufacturing environments. 
For more information on this Computerized Part Marking Technology, contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc. 
T: (905) 639-0909
E: info@millenniumsignatures.com
W: marksmanmarkingsystems.com
or millenniumsignatures.com

 

MARKSMAN SERIES LARGE FIELD ROTARY MARKER (EASTEC 2019)

Marksman’s Dynamic Large Field Rotary Marker will be on display at this year’s Eastec Exhibition in West Springfield Massachusetts next week (May 14,15 and 16 of 2019)

This unique system offers a Large 250mm x 250mm Marking Area making it super versatile for large components, multiple component marking and populating variable data on Metal Nameplates. This system is equipped with our Extended Height T-500-H Heavy Duty Manual Adjustable Z-Axis Tool Post which securely supports the large Marking Head Format while offering additional height allowing taller components to be marked.

As with previous generations of our Rotary Models, this equipment is equipped with a very heavy duty Precision Rotary Drive and 3-Jaw Chuck or Collet Assembly. 

Standard models can accommodate a 6.0” (15.24cm) diameters component. We can also modify this machine to accommodate larger diameters as needed. This system is a Ball Screw Driven Design which boasts the highest level of accuracy and repeatability available. It offers marking speeds of up to 5 characters per second (2.5mm) and is highly efficient at marking text of various fonts, mirror image characters, vector images (logos), 2D Barcodes, QR Codes, 2D Matrix and UID Code Technology. These systems are very robust with no cast components. All Precision machines components go into this very unique Marking System. 

The most valuable feature of this machine in our opinion is the Positive Locating Rotary Axis Slide Feature. This prevents you from having to manually set-up and align the rotary System to your Marking Head each time. The rotary axis stays aligned and can slide in to use and lock in place in one (1) second. 

If you need to use the system to mark a Nameplate or a flat component, unlock your rotary Axis, slide it out from under the marking head, pull up your new program and you’re Marking Flat stock. Do the same two steps again and you’re back marking Round stock. It’s that easy!

Contact one of the Part Marking Specialists at Millennium Signatures Marking Systems Inc., to learn more out the MK-200BN/250 complete with CDC-20 Rotary and all of its capabilities. 

T: (905) 639-0909

E: info@millenniumsignatures.com

W: marksmanmarkingsystems.com

or millenniumsignatures.com

#RotaryMarking

#CircumferentialMarking #CylinderMarking #DotPeenMarking#MarksmanRotary #PinMarking #ComputerizedMarking #Eastec2019#MillenniumSignatures #MarkingProducts #MarkingSystems#ProductTraceability #PermanentMarking

MARKING NAMEPLATES

 


Having Custom Metal Nameplates made or populating the variable data on existing plates is fast, easy and very cost effective to do. 
Contact the Part Marking Specialists at Millennium Signatures Marking Systems to learn about the different Nameplate Technologies we use to produce Custom Metal Nameplates and Decals to your exact specifications in just a couple days regardless of quantity. 
** VISIT US AT EASTEC 2019 **
Some of our most popular processes include Photo Resist Deep Etch & Fill, Anodized Aluminum Plates, Screen Printed Plates, Laser Etched, Metal Photo, Laser Sintered and more…..
We also maintain a full stock of our Marksman Series Computerized Dot Peen Marking Systems and Small Bench-top Galvo Driven Laser Marking Technologies which are ideal for the fast, efficient creation or population of variable data on existing Pre-Printed Plates. 
Contact our Part Marking Specialists for more information at:
T: (905) 639-0909
E: info@millenniumsignatures.com
W: marksmanmarkingsystems.com or millenniumsignatures.com